SBS-Smart Chargers

Lineage Series (LS)* Models are the most cost-effective series available and have all of the standard features

Professional Series (PS)* Models, in addition to the standard features, include, temperature compensation, and LED ladder Amp Meter, an 80% charged indicator and an internal preset ”Battery Type” switch allowing the unit to be easily configured with VRLA (Gel or AGM) or Flooded type (Wet) batteries.

Industrial Commercial Series (ICS) models are heavy duty industrial chargers. The ICS models provide all the same features as the PS models together with higher current rating.

HD12-10-1
This 12 volt 10 Amp charger was specially manufactured for mobile cart applications. This unit incorporates all of the standard smart charger features plus temperature compensation and an external switch to change input voltage between 115V 50Hz and 230V 60 Hz. There are also 5 common 12 VDC connectors for miscellaneous equipment, an IEC connector, and a 4' cable with amp connector.

Standard Features of all Smart Chargers:

• High energy return, fast charging
• Constant current first stage
• Dual voltage limit (cyclic/standby)
• Proportional timed cyclic charge stage
• Constant voltage float standby
• Automatic safety override timer
• Start delay on battery connect
• Short and reverse connector shutdown
• Rugged SCR phase control
• Main zero-crossing battery sensing
• Standard Input: 117 Volts AC 60 Hz

PS and ICS Additional Features:

• Constant voltage stage is proportionally timed and temperature compensated, minimizing electrolyte breadkown and gas emission.
• The final standby float charge will replace standing losses and keep the battery in a fully charged state and “Ready.”
• As soon as the battery is connected, a desulfation circuit encourages the breakdown of large sulfate crystal which can develop during prolonged periods of deep discharge.

home | cables | switches | contact us | our team