819 D.Drill® Directional Drilling Swivels – 3″ (76 mm) – Condux

Designed specifically for directional drilling, the Condux 819 D.Drill Swivels prevent boring equipments’ rotational torque from interfering with the product (cable or conduit) being pulled. The D.Drill Swivels are greasable and double sealed to keep contaminants out. Clevis pins with hex nuts allow for installation and removal from either side of the swivel. There is a 90 day warranty on the directional drill swivels.

CAUTION: To be used for directional drilling only.

CAUTION: Condux requires the use of a calcium based lubricant only. Other lubricants may have adverse reactions when exposed to bentonite products. Condux requires that the swivels be flushed with grease after each use to purge any contaminants that may have penetrated past the seals into the swivel while boring.

U.S. Patent No. 5,607,248.

D.Drill 819 Swivel Diagram illustration

Description

Ordering Information

 Working Load
Tension Compression A B C D E F G
Part Number (lbs) (N) (lbs) (N) (in) (mm) (in) (mm) (in) (mm) (in) (mm) (in) (mm) (in) (mm) (In) (mm)
08190016 8,500 37,808 2,800 12,454 15/8 41 0.63 16 6.85 174 1.59 40 0.56 14 0.78 20 2.36 60
08190020 10,000 44,480 3,300 14,678 2 51 0.75 19 7.83 199 1.81 46 0.63 16 0.75 19 2.89 73
08190025 20,000 88,960 6,600 29,357 2 1/2 64 1 25 10.93 278 2.84 72 0.88 22 1.25 32 3.67 93
08190030 30,000 133,440 10,000 44,480 3 76 1.31 33 12.75 324 3.56 90 1.13 29 1.37 36 4.5 114
08190040 45,000 200,160 15,000 66,720 4 102 1.63 41 15.25 387 4 102 1.25 32 1.84 47 5.58 142
08190045 60,000 266,880 20,000 88,960 4 5/8 117 1.75 44 17.48 444 4.62 117 1.5 38 2.13 54 6.31 160
08190060 90,000 400,320 30,000 133,440 6 152 2 51 18.27 464 4.5 114 1.75 44 2.18 56 6.59 167
08190080 120,000 533,760 40,000 177,920 8 203 2.25 57 21.71 552 5.25 133 2 51 2.5 64 8.25 210
Additional information
Weight18.83 lbs
Dimensions13 × 4.48 × 3 in
Fiber Count
Diameter
Product Downloads