Rail Mounting Hardware 1421SN Series – (1421SN25)
Features
- Extra spring nuts.
- 1/4 – 20 Strut spring nut.
- 1/4 – 20 x 1/2″ bolt.
- Used only in a number of our smaller floor and wall mounting cabinets.
Cabinet Compatibility
- RCH
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
| Part No. | Qty Included |
|---|---|
| 1421S | 4 bolts, 4 spring nuts |
| 1421SN | 8 bolts, 8 spring nuts |
| 1421SN25 | 25 bolts, 25 spring nuts |
178 in stock
$71.25
178 in stock
Related products
-
Hammond, Mounting Hardware, Rack Accessories, Rack Mounting Solutions
Mounting Screw and Cup Washer Combo-Pack 1421 Series – (1421A100)
Hammond, Mounting Hardware, Rack Accessories, Rack Mounting SolutionsMounting Screw and Cup Washer Combo-Pack 1421 Series – (1421A100)
The 1421 screw provides a standard 0.625” rack screws length with 10-32 threads. The screw itself features a slotted oval head and has a nickel plate finish.
SKU: 1421A100 -
Hammond, Mounting Hardware, Rack Accessories, Rack Mounting Solutions
Mounting Screw and Cup Washer Combo-Pack 1421 Series – (1421A25)
Hammond, Mounting Hardware, Rack Accessories, Rack Mounting SolutionsMounting Screw and Cup Washer Combo-Pack 1421 Series – (1421A25)
The 1421 screw provides a standard 0.625” rack screws length with 10-32 threads. The screw itself features a slotted oval head and has a nickel plate finish.
SKU: 1421A25 -
Hammond, Archive, Rack Accessories, Rack Mounting Solutions
10-32 Square Hole Cage Nuts 1421CNA Series – (CAGKIT1032-10)
Hammond, Archive, Rack Accessories, Rack Mounting Solutions10-32 Square Hole Cage Nuts 1421CNA Series – (CAGKIT1032-10)
Features
- 10-32 cage nuts for 0.375″/9.54mm square hole punched panel rails.
- Has the holding strength of a 10-32 nut.
- Heat-treated by means of austempering.
- Zinc plated.
Specifications
- Constructed of SAE 1050-1065 spring steel.
- Recommended torque spec 31.4 +/- 20% inch-lbs
- Maximum load rating will vary depending on rail mounting and cabinet load rating.
SKU: CAGKIT1032-10 -
Hammond, Mounting Hardware, Rack Accessories, Rack Mounting Solutions
10-32 Rack Screw 1421D Series – (1421D100)
Hammond, Mounting Hardware, Rack Accessories, Rack Mounting Solutions10-32 Rack Screw 1421D Series – (1421D100)
Features
- Slotted & phillips combination pan head screws
- Use where economy is important OR for close spacing.
- Example: multiple 1.75″ (1U) panels are mounted next to each other (as cup washers will interfere with each other)
- Zinc plated
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Part No. Qty Included Screw Length 1421D 25 screws 0.50 1421D100 100 screws 0.50 1421D500 500 screws 0.50 SKU: 1421D100 -
Hammond, Mounting Hardware, Rack Accessories, Rack Mounting Solutions
10-32 Rack Rail Clip Nuts 1421N Series – (CLPKIT1032-25)
Hammond, Mounting Hardware, Rack Accessories, Rack Mounting Solutions10-32 Rack Rail Clip Nuts 1421N Series – (CLPKIT1032-25)
Clip Nuts are a great alternative to Cage Nuts and have many more uses. Whether your rack has non-threaded round holes or square, clip nuts are an easier solution to speed up your installation.
Features
- 10-32 clip nuts for non-threaded rack rails.
- Heat-treated by means of austemper.
- Available in black or plated steel finish.
- Ships in clam shell or resealable jar, depending on quantity.
Specifications
- Constructed of SAE 1050-1065 spring steel.
- Recommended torque spec 31.4 +/- 20% inch-lbs
- For use with 0.069-0.079″ panel thickness.
- Hardness: HRC 38-42.
- Maximum load rating will vary depending on rail mounting and cabinet load rating.
- 1421NP are zinc plated CR3.
SKU: CLPKIT1032-25
