Discontinued Products
Showing 97–108 of 10724 resultsSorted by price: high to low
-
Discontinued Products
Type 12 Lay-In Wireway 1485 Series – (1485FTN) (DISCONTINUED)
Application
- Designed to enclose and protect electrical wiring from dirt, dust, oil and water.
- All sections and fittings are completely open on each side to allow wires and cables to be placed into the wireway without “pulling through”.
Standards
- UL 870 Type 1 (unless marked¹)
- CSA Type 1 (unless marked¹)
- Complies with
- NEMA Type 12
- IEC 60529, IP54
Construction
- Bodies and covers are formed from 14-gauge steel with 10 gauge steel flanges.
- Flanges are open at the top to allow cables to lay in when doors open.
- 12” x 6” size has a 12 gauge steel body with a 14-gauge cover.
- Smooth continuously welded seams.
- Interior surfaces are smooth to prevent wire damage during
installation. - Butt hinged cover is secured with easily operated quick release clamps.
- Oil resistant gaskets are permanently secured.
- Solid oil resistant gaskets are used between flanges when sections and fittings are bolted together.
- One gasket kit, complete with hardware is provided with each straight section or fitting.
- Sealing plate is supplied.
- Flange junctions are sealed with gasket sealing plates, which are put in place after wiring is completed. One is supplied with all straight sections and most fittings; see table for exact number.
Finish
- Sections and components are finished in ANSI 61 gray powder coating.
Notes
- When joining a wireway section or fitting to an enclosure be sure to order a box connector.
- When joining two wireway sections, or joining a wireway section to a fitting, a flat sealing plate is required at each junction; necessary kits are supplied with each section and fitting. See table, extra kits may be ordered if necessary.
- When joining a lay-in wireway section or fitting to a closure plate, a box connector, or cut-off fitting, an angle sealing plate is required at each junction.
- Necessary kits are supplied with each section and fitting – see table. Extra kits, although not normally required, are necessary when joining lay-in wireway to a non-lay-in section or fitting section.
Accessories
Typical Straight Section
Flat Sealing Plate
Angle Sealing Plate
Barrier Kit
Swivel Nipple
Flexible Fitting
Adjustable Fitting
Cross Fitting
Cut-Off Fitting (Lay-In)
Cut-Off Fitting (Non Lay-In)
Nipple
45 degree Elbow Top Opening
45 degree Elbow Inside Opening
45 degree Elbow Outside Opening
90 degree Elbow Top Opening
90 degree Elbow Inside Opening
90 degree Elbow Outside Opening
Tee Fitting Top Opening
Tee Fitting Outside and Top Opening
Reducers
Box Connector
12″ Transposition Sections Clockwise & Counter-Clockwise
Drop Hanger
Bracket Hanger
Cover Plate
Junction Box
SKU: 1485FTN -
Discontinued Products
Type 12 Consolets 1488 Series – (1488JQ11) (DISCONTINUED)
Application
- Designed for use as electric, hydraulic or pneumatic control and instrument enclosures.
- Ideal for flat or surface mounting/pedestal to provide the necessary 30° or 60° control slope.
- Provides protection from dirt, dust, oil and water.
Standards
- UL 508A Type 12, 13
- CSA Type 12, 13
- Complies with
- NEMA Type 12, 13
- IEC 60529, IP54
Construction
- Formed 14 gauge steel.
- Smooth, continuously welded seams.
- Construction provides either 30° or 60° slope on front cover depending on mounting position.
- Continuously hinged cover may be removed by pulling the hinge pin.
- Captive cover screws thread into sealed wells.
- Oil resistant gasket and adhesive.
- A bonding stud is provided on the door and a ground stud is provided on the enclosure.
Finish
- Cover and enclosure are phosphatized and finished in ANSI 61 gray powder coating.
Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Enclosure Part No. Cover H H1 H2 W D 1488EE7 8.00 2.50 7.16 8.00 7.44 1488EH7 8.00 2.50 7.16 12.00 7.44 1488EJ7 8.00 2.50 7.16 16.00 7.44 1488EL7 8.00 2.50 7.16 20.00 7.44 1488HH9 12.00 2.50 9.16 12.00 10.90 1488HJ9 12.00 2.50 9.16 16.00 10.90 1488HL9 12.00 2.50 9.16 20.00 10.90 1488HN9 12.00 2.50 9.16 24.00 10.90 1488JJ11 16.00 2.50 11.16 16.00 14.37 1488JL11 16.00 2.50 11.16 20.00 14.37 1488JN11 16.00 2.50 11.16 24.00 14.37 1488JQ11 16.00 2.50 11.16 30.00 14.37 1488JS11 16.00 2.50 11.16 36.00 14.37 1488LL13 20.00 2.50 13.16 20.00 17.83 1488LN13 20.00 2.50 13.16 24.00 17.83 1488LQ13 20.00 2.50 13.16 30.00 17.83 SKU: 1488JQ11 -
Discontinued Products
(Discontinued) Outdoor FilterFans 3RFF Series – (PF43000T3RBK230)
Features
- Designed for outdoor weather where resistance against falling rain, ice formation, and UV degradation is important to ensure operation of apparatus inside enclosure.
- Maintains a UL Tested NEMA Type 3R seal against enclosure without need of a rainhood
- Patented “Click & Fit” design provides a hardware free installation!
- Plastic made from strong, heat resistant (ABS-FR), UL 94 VO fire approved material
- Fluted filter-mat provides longer service life, holding more dust before impeding airflow extending the mean time between maintenance for outdoor enclosure; especially critical for those located in remote areas.
- Offered in Light Gray (RAL 7035) and Black (RAL 9011)
Accessories
SKU: PF43000T3RBK230 -
Discontinued Products
(Discontinued) Outdoor FilterFans 3RFF Series – (PF43000T3RLG230)
Features
- Designed for outdoor weather where resistance against falling rain, ice formation, and UV degradation is important to ensure operation of apparatus inside enclosure.
- Maintains a UL Tested NEMA Type 3R seal against enclosure without need of a rainhood
- Patented “Click & Fit” design provides a hardware free installation!
- Plastic made from strong, heat resistant (ABS-FR), UL 94 VO fire approved material
- Fluted filter-mat provides longer service life, holding more dust before impeding airflow extending the mean time between maintenance for outdoor enclosure; especially critical for those located in remote areas.
- Offered in Light Gray (RAL 7035) and Black (RAL 9011)
Accessories
SKU: PF43000T3RLG230 -
Discontinued Products
Type 4X Polyester Junction Box w/ Window PJ Series – (PJ18168HW) (DISCONTINUED)
Discontinued ProductsType 4X Polyester Junction Box w/ Window PJ Series – (PJ18168HW) (DISCONTINUED)
Application
- Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
- Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
- Ideal in applications with high temperatures or highly corrosive environments.
Standards
- UL 508A Type 1, 2, 3, 4, 4X, 12 and 13
- CSA Type 1, 2, 3, 4, 4X, 12 and 13
- Complies with
- NEMA Type 1, 2, 3, 4, 4X, 12, & 13
- IEC 60529, IP66
Construction
- Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
- Enhanced UV inhibitors protect against outdoor weathering.
- Standard JIC sizes under 18″x16″.
- Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included.
- Stainless steel draw type “snap latch” door fasteners.
- Door fasteners include a provision for padlocking.
- Enclosures are available with bonded polycarbonate viewing windows.
- Door is supported with a continuous stainless steel hinge.
- Captive oil resistant gasket provides a positive seal.
- Threaded brass inserts are provided for mounting feet to the rear of the enclosure.
- Stainless steel mounting brackets and hardware are provided for mounting to the rear of the enclosure.
- Operating temperatures between 130°C and -40°C (266°F to -40°F).
- Impact index of 6.78J (5 ft/lb).
- For corrosion resistance information, please refer to table in the Technical Information section.
Finish
- Fiberglass polyester material has a gray finish.
- Optional inner panels are available in white powder coated finished steel or unfinished aluminum, or Fiberglass.
Accessories
Additional Inner Panels
Terminal Kit Assemblies
Pole Mounting Kit
PJ/PJU/PCJ Replacement Hardware Kits
PJ Stainless Replacement Mounting Feet
Climate Control
General Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Lift-Off Hinged Snap Latch Twist Latch Enclosure Optional Inner Panel Part No. Part No. Part No. Part No. H W D H W Part No. PJ664W PJ664HW PJ664LW PJ664TW 6.10 6.10 4.18 4.88 4.88 14R0505 PJ864W PJ864HW PJ864LW PJ864TW 8.00 6.12 4.13 6.75 4.88 14R0705 PJ1084W PJ1084HW PJ1084LW PJ1084TW 10.13 8.26 4.13 8.75 6.88 14R0907 PJ1086W PJ1086HW PJ1086LW PJ1086TW 10.13 8.26 6.13 8.75 6.88 14R0907 PJ12106W PJ12106HW PJ12106LW PJ12106TW 12.13 10.26 6.13 10.75 8.88 14R1109 PJ12124W PJ12124HW PJ12124LW PJ12124TW 12.13 12.13 4.13 10.75 10.88 14R1111 PJ12126W PJ12126HW PJ12126LW PJ12126TW 12.13 12.13 6.13 10.75 10.88 14R1111 PJ14126W PJ14126HW PJ14126LW PJ14126TW 14.13 12.26 6.13 12.75 10.88 14R1311 PJ16148W PJ16148HW PJ16148LW PJ16148TW 16.27 14.40 8.13 14.75 12.88 14R1513 PJ18168W PJ18168HW PJ18168LW PJ18168TW 18.40 16.40 8.13 16.88 14.88 P1868 PJ20168W PJ20168HW PJ20168LW PJ20168TW 20.00 16.00 8.13 18.44 14.44 P2068 SKU: PJ18168HW -
Discontinued Products
Type 4X Polyester Junction Box w/ Window PJ Series – (PJ18168W) (DISCONTINUED)
Application
- Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
- Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
- Ideal in applications with high temperatures or highly corrosive environments.
Standards
- UL 508A Type 1, 2, 3, 4, 4X, 12 and 13
- CSA Type 1, 2, 3, 4, 4X, 12 and 13
- Complies with
- NEMA Type 1, 2, 3, 4, 4X, 12, & 13
- IEC 60529, IP66
Construction
- Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
- Enhanced UV inhibitors protect against outdoor weathering.
- Standard JIC sizes under 18″x16″.
- Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included.
- Stainless steel draw type “snap latch” door fasteners.
- Door fasteners include a provision for padlocking.
- Enclosures are available with bonded polycarbonate viewing windows.
- Door is supported with a continuous stainless steel hinge.
- Captive oil resistant gasket provides a positive seal.
- Threaded brass inserts are provided for mounting feet to the rear of the enclosure.
- Stainless steel mounting brackets and hardware are provided for mounting to the rear of the enclosure.
- Operating temperatures between 130°C and -40°C (266°F to -40°F).
- Impact index of 6.78J (5 ft/lb).
- For corrosion resistance information, please refer to table in the Technical Information section.
Finish
- Fiberglass polyester material has a gray finish.
- Optional inner panels are available in white powder coated finished steel or unfinished aluminum, or Fiberglass.
Accessories
- Additional Inner Panels
- Terminal Kit Assemblies
- Pole Mounting Kit
- PJ/PJU/PCJ Replacement Hardware Kits
- PJ Stainless Replacement Mounting Feet
- Climate Control
- General Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Lift-Off Hinged Snap Latch Twist Latch Enclosure Optional Inner Panel Part No. Part No. Part No. Part No. H W D H W Part No. PJ664W PJ664HW PJ664LW PJ664TW 6.10 6.10 4.18 4.88 4.88 14R0505 PJ864W PJ864HW PJ864LW PJ864TW 8.00 6.12 4.13 6.75 4.88 14R0705 PJ1084W PJ1084HW PJ1084LW PJ1084TW 10.13 8.26 4.13 8.75 6.88 14R0907 PJ1086W PJ1086HW PJ1086LW PJ1086TW 10.13 8.26 6.13 8.75 6.88 14R0907 PJ12106W PJ12106HW PJ12106LW PJ12106TW 12.13 10.26 6.13 10.75 8.88 14R1109 PJ12124W PJ12124HW PJ12124LW PJ12124TW 12.13 12.13 4.13 10.75 10.88 14R1111 PJ12126W PJ12126HW PJ12126LW PJ12126TW 12.13 12.13 6.13 10.75 10.88 14R1111 PJ14126W PJ14126HW PJ14126LW PJ14126TW 14.13 12.26 6.13 12.75 10.88 14R1311 PJ16148W PJ16148HW PJ16148LW PJ16148TW 16.27 14.40 8.13 14.75 12.88 14R1513 PJ18168W PJ18168HW PJ18168LW PJ18168TW 18.40 16.40 8.13 16.88 14.88 P1868 PJ20168W PJ20168HW PJ20168LW PJ20168TW 20.00 16.00 8.13 18.44 14.44 P2068 SKU: PJ18168W -
Discontinued Products
Type 4X Polyester Junction Box w/ Window PJU Series – (PJU16148LWF) (DISCONTINUED)
Discontinued ProductsType 4X Polyester Junction Box w/ Window PJU Series – (PJU16148LWF) (DISCONTINUED)
Application
- Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
- Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
- Ideal in applications with high temperatures or highly corrosive environments.
Standards
- UL 508A Type 1, 2, 3, 4, 4X, 12 and 13
- CSA Type 1, 2, 3, 4, 4X, 12 and 13
- Complies with
- NEMA Type 1, 2, 3, 4, 4X, 12 and 13
- IEC 60529, IP66
Construction
- Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
- Enhanced UV inhibitors protect against outdoor weathering.
- Standard JIC sizes under 18″x16″.
- Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included.
- Various latching options.
- Enclosures are available with bonded polycarbonate viewing windows.
- Door is supported with a continuous stainless steel hinge pin.
- Captive oil resistant gasket provides a positive seal.
- Threaded brass inserts are provided for mounting feet to the rear of the enclosure.
- Operating temperatures between 130°C and -40°C (266°F to -40°F).
- Impact index of 6.78J (5 ft/lb).
- For corrosion resistance information, please refer to table in the Technical Information section.
Finish
- Fiberglass polyester material has a light gray finish.
- Optional inner panels are available in white powder coated finished steel or unfinished aluminum, or Fiberglass.
Accessories
SKU: PJU16148LWF -
Discontinued Products
(Discontinued) 125-1300 W Fan Heater with Thermostat FLH Series – (FLHTF400A230)
Discontinued Products(Discontinued) 125-1300 W Fan Heater with Thermostat FLH Series – (FLHTF400A230)
Features
- Designed to prevent condensation or maintain minimum temperature in enclosures.
- Built in Thermostat. (-18 C to +38 C) (0 F to +100 F)
- Fan Auto/On switch with pilot light for Heat On indication
- High temperature safety protection
- Aluminum alloy outer casing
- Connection via terminal block.
- 1300W models are cURus approved only.
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Overall Dimensions Part No. Watts Voltage Hz CFM Height x Width x Depth FLHTF125A115 125 W 120 V 60 20 5.5″ x 4.0″ x 5.3″ FLHTF125A230 105/125 W 220/240 V 50/60 20 5.5″ x 4.0″ x 5.3″ FLHTF200A115 200 W 120 V 60 20 5.5″ x 4.0″ x 5.3″ FLHTF200A230 165/200 W 220/240 V 50/60 20 5.5″ x 4.0″ x 5.3″ FLHTF400A115 400 W 120 V 60 20 7.5″ x 4.0″ x 5.3″ FLHTF400A230 335/400 W 220/240 V 50/60 20 7.5″ x 4.0″ x 5.3″ FLHTF800A115 800 W 120 V 60 20 7.5″ x 4.0″ x 5.3″ FLHTF800A230 670/800 W 220/240 V 50/60 20 7.5″ x 4.0″ x 5.3″ FLHTF1300A115 1300 W 120 V 60 50 7.5″ x 5.6″ x 6.9″ FLHTF1300A230 1080/1300 W 220/240 V 50/60 50 7.5″ x 5.6″ x 6.9″ SKU: FLHTF400A230 -
Discontinued Products
(Discontinued) 125-1300 W Fan Heater with Thermostat FLH Series – (FLHTF400A115)
Discontinued Products(Discontinued) 125-1300 W Fan Heater with Thermostat FLH Series – (FLHTF400A115)
Features
- Designed to prevent condensation or maintain minimum temperature in enclosures.
- Built in Thermostat. (-18 C to +38 C) (0 F to +100 F)
- Fan Auto/On switch with pilot light for Heat On indication
- High temperature safety protection
- Aluminum alloy outer casing
- Connection via terminal block.
- 1300W models are cURus approved only.
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Overall Dimensions Part No. Watts Voltage Hz CFM Height x Width x Depth FLHTF125A115 125 W 120 V 60 20 5.5″ x 4.0″ x 5.3″ FLHTF125A230 105/125 W 220/240 V 50/60 20 5.5″ x 4.0″ x 5.3″ FLHTF200A115 200 W 120 V 60 20 5.5″ x 4.0″ x 5.3″ FLHTF200A230 165/200 W 220/240 V 50/60 20 5.5″ x 4.0″ x 5.3″ FLHTF400A115 400 W 120 V 60 20 7.5″ x 4.0″ x 5.3″ FLHTF400A230 335/400 W 220/240 V 50/60 20 7.5″ x 4.0″ x 5.3″ FLHTF800A115 800 W 120 V 60 20 7.5″ x 4.0″ x 5.3″ FLHTF800A230 670/800 W 220/240 V 50/60 20 7.5″ x 4.0″ x 5.3″ FLHTF1300A115 1300 W 120 V 60 50 7.5″ x 5.6″ x 6.9″ FLHTF1300A230 1080/1300 W 220/240 V 50/60 50 7.5″ x 5.6″ x 6.9″ SKU: FLHTF400A115 -
Discontinued Products
Type 4X Polyester Junction Box w/ Window PJ Series – (PJ16148TW) (DISCONTINUED)
Discontinued ProductsType 4X Polyester Junction Box w/ Window PJ Series – (PJ16148TW) (DISCONTINUED)
Application
- Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
- Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
- Ideal in applications with high temperatures or highly corrosive environments.
Standards
- UL 508A Type 1, 2, 3, 4, 4X, 12 and 13
- CSA Type 1, 2, 3, 4, 4X, 12 and 13
- Complies with
- NEMA Type 1, 2, 3, 4, 4X, 12, & 13
- IEC 60529, IP66
Construction
- Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
- Enhanced UV inhibitors protect against outdoor weathering.
- Standard JIC sizes under 18″x16″.
- Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included.
- Stainless steel draw type “snap latch” door fasteners.
- Door fasteners include a provision for padlocking.
- Enclosures are available with bonded polycarbonate viewing windows.
- Door is supported with a continuous stainless steel hinge.
- Captive oil resistant gasket provides a positive seal.
- Threaded brass inserts are provided for mounting feet to the rear of the enclosure.
- Stainless steel mounting brackets and hardware are provided for mounting to the rear of the enclosure.
- Operating temperatures between 130°C and -40°C (266°F to -40°F).
- Impact index of 6.78J (5 ft/lb).
- For corrosion resistance information, please refer to table in the Technical Information section.
Finish
- Fiberglass polyester material has a gray finish.
- Optional inner panels are available in white powder coated finished steel or unfinished aluminum, or Fiberglass.
Accessories
- Additional Inner Panels
- Terminal Kit Assemblies
- Pole Mounting Kit
- PJ/PJU/PCJ Replacement Hardware Kits
- PJ Stainless Replacement Mounting Feet
- Climate Control
- General Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Lift-Off Hinged Snap Latch Twist Latch Enclosure Optional Inner Panel Part No. Part No. Part No. Part No. H W D H W Part No. PJ664W PJ664HW PJ664LW PJ664TW 6.10 6.10 4.18 4.88 4.88 14R0505 PJ864W PJ864HW PJ864LW PJ864TW 8.00 6.12 4.13 6.75 4.88 14R0705 PJ1084W PJ1084HW PJ1084LW PJ1084TW 10.13 8.26 4.13 8.75 6.88 14R0907 PJ1086W PJ1086HW PJ1086LW PJ1086TW 10.13 8.26 6.13 8.75 6.88 14R0907 PJ12106W PJ12106HW PJ12106LW PJ12106TW 12.13 10.26 6.13 10.75 8.88 14R1109 PJ12124W PJ12124HW PJ12124LW PJ12124TW 12.13 12.13 4.13 10.75 10.88 14R1111 PJ12126W PJ12126HW PJ12126LW PJ12126TW 12.13 12.13 6.13 10.75 10.88 14R1111 PJ14126W PJ14126HW PJ14126LW PJ14126TW 14.13 12.26 6.13 12.75 10.88 14R1311 PJ16148W PJ16148HW PJ16148LW PJ16148TW 16.27 14.40 8.13 14.75 12.88 14R1513 PJ18168W PJ18168HW PJ18168LW PJ18168TW 18.40 16.40 8.13 16.88 14.88 P1868 PJ20168W PJ20168HW PJ20168LW PJ20168TW 20.00 16.00 8.13 18.44 14.44 P2068 SKU: PJ16148TW -
Discontinued Products
Type 4X Polyester Junction Box w/ Window PJ Series – (PJ16148LW) (DISCONTINUED)
Discontinued ProductsType 4X Polyester Junction Box w/ Window PJ Series – (PJ16148LW) (DISCONTINUED)
Application
- Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
- Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
- Ideal in applications with high temperatures or highly corrosive environments.
Standards
- UL 508A Type 1, 2, 3, 4, 4X, 12 and 13
- CSA Type 1, 2, 3, 4, 4X, 12 and 13
- Complies with
- NEMA Type 1, 2, 3, 4, 4X, 12, & 13
- IEC 60529, IP66
Construction
- Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
- Enhanced UV inhibitors protect against outdoor weathering.
- Standard JIC sizes under 18″x16″.
- Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included.
- Stainless steel draw type “snap latch” door fasteners.
- Door fasteners include a provision for padlocking.
- Enclosures are available with bonded polycarbonate viewing windows.
- Door is supported with a continuous stainless steel hinge.
- Captive oil resistant gasket provides a positive seal.
- Threaded brass inserts are provided for mounting feet to the rear of the enclosure.
- Stainless steel mounting brackets and hardware are provided for mounting to the rear of the enclosure.
- Operating temperatures between 130°C and -40°C (266°F to -40°F).
- Impact index of 6.78J (5 ft/lb).
- For corrosion resistance information, please refer to table in the Technical Information section.
Finish
- Fiberglass polyester material has a gray finish.
- Optional inner panels are available in white powder coated finished steel or unfinished aluminum, or Fiberglass.
Accessories
- Additional Inner Panels
- Terminal Kit Assemblies
- Pole Mounting Kit
- PJ/PJU/PCJ Replacement Hardware Kits
- PJ Stainless Replacement Mounting Feet
- Climate Control
- General Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Lift-Off Hinged Snap Latch Twist Latch Enclosure Optional Inner Panel Part No. Part No. Part No. Part No. H W D H W Part No. PJ664W PJ664HW PJ664LW PJ664TW 6.10 6.10 4.18 4.88 4.88 14R0505 PJ864W PJ864HW PJ864LW PJ864TW 8.00 6.12 4.13 6.75 4.88 14R0705 PJ1084W PJ1084HW PJ1084LW PJ1084TW 10.13 8.26 4.13 8.75 6.88 14R0907 PJ1086W PJ1086HW PJ1086LW PJ1086TW 10.13 8.26 6.13 8.75 6.88 14R0907 PJ12106W PJ12106HW PJ12106LW PJ12106TW 12.13 10.26 6.13 10.75 8.88 14R1109 PJ12124W PJ12124HW PJ12124LW PJ12124TW 12.13 12.13 4.13 10.75 10.88 14R1111 PJ12126W PJ12126HW PJ12126LW PJ12126TW 12.13 12.13 6.13 10.75 10.88 14R1111 PJ14126W PJ14126HW PJ14126LW PJ14126TW 14.13 12.26 6.13 12.75 10.88 14R1311 PJ16148W PJ16148HW PJ16148LW PJ16148TW 16.27 14.40 8.13 14.75 12.88 14R1513 PJ18168W PJ18168HW PJ18168LW PJ18168TW 18.40 16.40 8.13 16.88 14.88 P1868 PJ20168W PJ20168HW PJ20168LW PJ20168TW 20.00 16.00 8.13 18.44 14.44 P2068 SKU: PJ16148LW -
Discontinued Products
Potted High Voltage (Plate) (DISCONTINUED) & Filament – 40 VA to 243 VA 300P Series – (370XP) (DISCONTINUED)
Discontinued ProductsPotted High Voltage (Plate) (DISCONTINUED) & Filament – 40 VA to 243 VA 300P Series – (370XP) (DISCONTINUED)
Features
- A perfect match to our 1650P potted output transformers.
- Enclosed in a drawn steel case, the transformer is completely potted in epoxy.
- Mounting hardware included.
- Primary: Universal – 100, 110, 120, 200, 220, 240 VAC 50/60 Hz.
- Bias Tap: 50 VAC tap from high voltage secondary C.T.
- Highpot tested: 2,000 VAC
- Faraday Copper Primary Shield: Our electrostatic shield reduces the capacitive coupling from the primary – greatly attenuating higher frequency current coupling to the secondaries (shield is internally grounded to the end bell).
- Windings: Concentric wound for low stray field and low noise
- Finish: Black powder paint to match our 1650P series of potted output transformers
- Units can be run full wave bridge or full wave C.T.
- c UL us recognized (E207860)
Gallery
SKU: 370XP
