Discontinued Products
Showing 133–144 of 10724 resultsSorted by price: high to low
-
Discontinued Products
Type 4X Polyester Junction Box w/ Window PJU Series – (PJU12106W) (DISCONTINUED)
Discontinued ProductsType 4X Polyester Junction Box w/ Window PJU Series – (PJU12106W) (DISCONTINUED)
Application
- Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
- Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
- Ideal in applications with high temperatures or highly corrosive environments.
Standards
- UL 508A Type 1, 2, 3, 4, 4X, 12 and 13
- CSA Type 1, 2, 3, 4, 4X, 12 and 13
- Complies with
- NEMA Type 1, 2, 3, 4, 4X, 12 and 13
- IEC 60529, IP66
Construction
- Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
- Enhanced UV inhibitors protect against outdoor weathering.
- Standard JIC sizes under 18″x16″.
- Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included.
- Various latching options.
- Enclosures are available with bonded polycarbonate viewing windows.
- Door is supported with a continuous stainless steel hinge pin.
- Captive oil resistant gasket provides a positive seal.
- Threaded brass inserts are provided for mounting feet to the rear of the enclosure.
- Operating temperatures between 130°C and -40°C (266°F to -40°F).
- Impact index of 6.78J (5 ft/lb).
- For corrosion resistance information, please refer to table in the Technical Information section.
Finish
- Fiberglass polyester material has a light gray finish.
- Optional inner panels are available in white powder coated finished steel or unfinished aluminum, or Fiberglass.
Accessories
SKU: PJU12106W -
Discontinued Products
Filterfan Rainhoods – 4/4X RHN4 Series – (RH30000N4SSFDA) (DISCONTINUED)
Application
- Type 4/4X (IPx6) Rainhoods (when used with PF Series Filterfans)
- Ideal for locations with high exposure to spraying water
- Painted galvanized steel version for Type 4
- 304 and 316 stainless steel versions for Type 4X
- Specially gasketed, 316 stainless steel, sanitary version for FDA compatible Type 4X
- Sold individually
Features
- Easy installation – mounting bracket installed around cutout and rainhood slides down over bracket
- High compression, closed cell black gasket with multiple seal dams ensure tight, waterproof seal
- Sanitary version has special FDA compatible, white multiple seal gasket
- Direct spray barrier/baffle designed to maximize airflow while providing superior protection from overspray
Standards
- UL / cUL Listed Type 4 or 4X (as noted)
- must be used in combination with PF Series Filterfan
Finish
- Base mounting bracket – unpainted 304 SS
- Rainhood Covers
- Type 4 – ANSI61 Gray (GY) or RAL7035 Light Gray (LG) powder coated finish on galvanized steel
- Type 4X – 304 or 316 stainless steel with #4 brushed finish
- Sanitary Type 4X – 316 stainless steel with #4 brushed finish
Grill/Solid Cover Kit
- Can be installed in bottom opening of rain hood
- Grill allows ventilation while preventing unwanted entry of large contaminants
- Solid cover allows sealing of opening when fan/filter not in use
SKU: RH30000N4SSFDA -
Discontinued Products
Type 1 Mild Steel 3 Piece Wallmount Enclosure N1W S Series – (N1WS24206) (DISCONTINUED)
Discontinued ProductsType 1 Mild Steel 3 Piece Wallmount Enclosure N1W S Series – (N1WS24206) (DISCONTINUED)
Application
- Designed for indoor use to enclose controls, instruments, and components which do not require oil-tight or dust-tight protection.
- Ideal for applications where components may be easily mounted and wired prior to installation of wrapper and door.
Standards
- UL 50 Type 1
- CSA Type 1
- Complies with
- NEMA Type 1
- IEC 60529, IP20
Construction
- Three piece assembly consisting of a base, wrapper, and door.
- Components are attached and secured with metal screws.
- 14 gauge reverse formed base acts as mounting surface (no separate inner panel) and provides clearance for mounting hardware.
- Wrapper is available in three depths: 4″, 6″, and 8″.
- Wrapper is formed from 16 gauge steel, with no knock-outs in the sides.
- Door assembly formed from 16 gauge steel.
- Removable door is mounted on slip hinges.
- A bonding stud is provided on the door and a grounding screw is provided for the enclosure.
- Door is fastened with a slotted quarter turn latch.
Finish
- Base, wrapper and door are finished in ANSI 61 gray powder coating.
Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Enclosure Part No. H W D N1WS864 8.00 6.00 4.00 N1WS1084 10.00 8.00 4.00 N1WS12104 12.00 10.00 4.00 N1WS16124 16.00 12.00 4.00 N1WS20164 20.00 16.00 4.00 N1WS24204 24.00 20.00 4.00 N1WS866 8.00 6.00 6.00 N1WS1086 10.00 8.00 6.00 N1WS12106 12.00 10.00 6.00 N1WS16126 16.00 12.00 6.00 N1WS20166 20.00 16.00 6.00 N1WS24206 24.00 20.00 6.00 N1WS868 8.00 6.00 8.00 N1WS1088 10.00 8.00 8.00 N1WS12108 12.00 10.00 8.00 N1WS16128 16.00 12.00 8.00 N1WS20168 20.00 16.00 8.00 N1WS24208 24.00 20.00 8.00 SKU: N1WS24206 -
Discontinued Products
Type 4, 4X Polyester Pushbutton Enclosure PJPBLC Series – (PJ16148HP30) (DISCONTINUED)
Discontinued ProductsType 4, 4X Polyester Pushbutton Enclosure PJPBLC Series – (PJ16148HP30) (DISCONTINUED)
Application
- Designed for use as pushbutton enclosures for 30.5mm devices.
- Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
- Ideal in applications with high temperatures or highly corrosive environments.
Standards
- UL 508A Type 1, 2, 3, 4, 4X, 12 and 13
- CSA Type 1, 2, 3, 4, 4X, 12 and 13
- Complies with
- NEMA Type 1, 2, 3, 4, 4X, 12 and 13
- IEC 60529, IP66
Construction
- Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
- Standard JIC sizes under 18″ x 16″.
- Threaded brass inserts are provided for optional inner panel or terminal kit mounting.
- Cover is fastened with captive stainless steel screws in threaded brass inserts.
- Captive oil resistant gasket provides a positive seal.
- Threaded brass inserts are provided for mounting feet to the rear of the enclosure.
- Stainless steel mounting brackets and hardware are provided for mounting to the rear of the enclosure.
- Enhanced UV inhibitors protect against outdoor weathering.
- Operating temperatures between 130°C and -40°C (266°F to -40°F).
- Impact index of 6.78J (5 ft/lb).
- For corrosion resistance information, please refer to table in Technical Information.
Finish
- Fiberglass polyester material has a gray finish.
- Optional inner panels are available in white powder coated finished steel or unfinished aluminum.
Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Lift Off Cover Hinged Cover No. Enclosure Optional Inner Panel 30.5mm PB Part No. 30.5mm PB Part No. Holes H W D Part No. H W PJ664P4 PJ664HP4 4 6.10 6.10 4.18 14R0505 4.88 4.88 PJ864P6 PJ864HP6 6 8.00 6.12 4.13 14R0705 6.75 4.88 PJ1084P9 PJ1084HP9 9 10.13 8.26 4.13 14R0907 8.75 6.88 PJ1086P9 PJ1086HP9 9 10.13 8.26 6.13 14R0907 8.75 6.88 PJ1086P12 PJ1086HP12 12 10.13 8.26 6.13 14R0907 8.75 6.88 PJ12106P16 PJ12106HP16 16 12.13 10.26 6.13 14R1109 10.75 8.88 PJ12106P20 PJ12106HP20 20 12.13 10.26 6.13 14R1109 10.75 8.88 PJ14126P25 PJ14126HP25 25 14.13 12.26 6.13 14R1311 12.75 10.88 PJ16148P30 PJ16148HP30 30 16.27 14.40 8.13 14R1513 14.75 12.88 PJ18168P42 PJ18168HP42 42 18.40 16.40 8.13 P1868 16.88 14.88 SKU: PJ16148HP30 -
Discontinued Products
Tube Output (10 – 280 Watts) (DISCONTINUED) 1608-1650 Series – (1650M) (DISCONTINUED)
Discontinued ProductsTube Output (10 – 280 Watts) (DISCONTINUED) 1608-1650 Series – (1650M) (DISCONTINUED)
Features
- Please see our NEW & improved versions (easy wire secondary series).
- Designed for push-pull tube output circuits.
- Enclosed (shielded), 4 slot, above chassis Type “X” mounting.
- Frequency response 30 Hz. to 30 Khz. at full rated power (+/- 1 db max. – ref. 1 Khz) minimum.
- Insulated flexible leads 8″ min.
- Manufactured with plastic coil forms for coil support and insulation.
- Typical applications – Push-Pull: triode, Ultra-Linear pentode, pentode and tetrode connected audio output.
- Due to the unique interleaving of the windings BOTH secondary windings must be engaged to meet specifications (see hook-up diagrams below).
- For the “ultimate” in Push-Pull output see our line of epoxy potted output transformers.
1645 Only
-
Secondary Connections (Due to the unique interleaving of the windings BOTH secondary windings must be engaged to meet specifications)
-
To hook up 4/8/16 ohm secondary loads – see schematic (do not use the white wire).
-
To hook up secondary to 70V loads, jumper Blk/Yel wire to Grn wire. Connect load to Blk and White wires.
Gallery
SKU: 1650M -
Discontinued Products
Type 3R Painted Galvanized Steel Wallmount Enclosure C3R HCRMD Series – (C3R20208HCR) (DISCONTINUED)
Discontinued ProductsType 3R Painted Galvanized Steel Wallmount Enclosure C3R HCRMD Series – (C3R20208HCR) (DISCONTINUED)
Application
- Designed for use as a wiring/junction box.
- Provides protection against rain, sleet, snow and dripping water.
Standards
- UL-50 Type 3R
- CSA Type 3R
- Complies with
- NEMA Type 3R
- IEC 60529, IP24
Construction
- Formed and spot welded from 16 or 14 gauge galvanized steel.
- Drip shield top and seam-free sides, front and back.
- Stainless steel continuous hinge.
- Cover fastened with captive plated screws.
- Padlocking hasp.
- Collar studs provided for mounting optional panels.
- External mounting feet.
- Oil resistant gaskets are permanently secured.
Finish
- Enclosure and cover are finished inside and out in ANSI 61 gray powder coating.
Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Enclosure Optional Inner Panel Part No. H W D Part Number H W C3R16126HCR 16.00 12.00 6.00 18P1309 13.00 9.00 C3R16166HCR 16.00 16.00 6.00 18P1313 13.00 13.00 C3R18186HCR 18.00 18.00 6.00 18P1515 15.00 15.00 C3R20166HCR 20.00 16.00 6.00 18P1713 17.00 13.00 C3R20208HCR 20.00 20.00 8.00 18P1717 17.00 17.00 C3R24208HCR 24.00 20.00 8.00 18P2117 21.00 17.00 C3R24248HCR 24.00 24.00 8.00 18P2121 21.00 21.00 C3R30248HCR 30.00 24.00 8.00 18P2721 27.00 21.00 C3R30308HCR 30.00 30.00 8.00 18P2727 27.00 27.00 C3R181810HCR 18.00 18.00 10.00 18P1515 15.00 15.00 C3R242410HCR 24.00 24.00 10.00 18P2121 21.00 21.00 C3R302410HCR 30.00 24.00 10.00 18P2721 27.00 21.00 C3R363610HCR 36.00 36.00 10.00 18P3333 33.00 33.00 C3R303012HCR 30.00 30.00 12.00 18P2727 27.00 27.00 C3R362412HCR 36.00 24.00 12.00 18P3321 33.00 21.00 C3R363012HCR 36.00 30.00 12.00 18P3327 33.00 27.00 C3R423012HCR 42.00 30.00 12.00 18P3927 39.00 27.00 C3R363612HCR 36.00 36.00 12.00 18P3333 33.00 33.00 C3R423612HCR 42.00 36.00 12.00 18P3933 39.00 33.00 C3R483612HCR 48.00 36.00 12.00
…Product data
SKU: C3R20208HCR -
Discontinued Products
(Discontinued) Type 4X Aluminum Junction Box Eclipse Junior Series – (EJ866AL)
Application
- Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
- Provides protection where equipment may be hosed down or otherwise be very wet, or in specific applications where corrosion may be a problem.
Standards
- UL 508A Type 3R, 4, 4X, 12, and 13
- CSA Type 3R, 4, 4X, 12, and 13
- Complies with
- NEMA Type 3R, 4, 4X, 12 and 13
- IEC 60529, IP66
Construction
- Formed from 0.08″ Type 5052 H-32 aluminum.
- Smooth, continuously welded seams without knockouts, cutouts, or holes.
- Formed lip on enclosure to exclude flowing liquids and contaminants.
- Welded brackets provide for enclosure mounting.
- Continuously hinged cover has aluminum hinge and provides 180° opening.
- Door latches feature the added safety of quarter turn slot requiring use of tool for opening.
- Quarter turn latches formed from 316 stainless steel.
- Seamless poured-in place gasket.
- Models larger than 4″x4″ include a removable 14 gauge galvanized inner panel.
- Tapped studs are provided for mounting inner panels.
- A bonding stud is provided on the door and a grounding stud is provided on the enclosure.
- Grounding and panel mounting hardware provided.
Finish
- Cover and enclosure are natural unfinished aluminum.
- Removable inner panel is unpainted galvanized steel.
Videos
Accessories
Additional Inner Panels
Swing Panel Kit
Terminal Kit Assemblies
Padlock Adaptor
Quarter Turn Assemblies
Climate Control
General Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
