Discontinued Products
Showing 109–120 of 10724 resultsSorted by price: high to low
-
Discontinued Products
Type 4X Polyester Junction Box w/ Window PJU Series – (PJU14126LWF) (DISCONTINUED)
Discontinued ProductsType 4X Polyester Junction Box w/ Window PJU Series – (PJU14126LWF) (DISCONTINUED)
Application
- Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
- Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
- Ideal in applications with high temperatures or highly corrosive environments.
Standards
- UL 508A Type 1, 2, 3, 4, 4X, 12 and 13
- CSA Type 1, 2, 3, 4, 4X, 12 and 13
- Complies with
- NEMA Type 1, 2, 3, 4, 4X, 12 and 13
- IEC 60529, IP66
Construction
- Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
- Enhanced UV inhibitors protect against outdoor weathering.
- Standard JIC sizes under 18″x16″.
- Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included.
- Various latching options.
- Enclosures are available with bonded polycarbonate viewing windows.
- Door is supported with a continuous stainless steel hinge pin.
- Captive oil resistant gasket provides a positive seal.
- Threaded brass inserts are provided for mounting feet to the rear of the enclosure.
- Operating temperatures between 130°C and -40°C (266°F to -40°F).
- Impact index of 6.78J (5 ft/lb).
- For corrosion resistance information, please refer to table in the Technical Information section.
Finish
- Fiberglass polyester material has a light gray finish.
- Optional inner panels are available in white powder coated finished steel or unfinished aluminum, or Fiberglass.
Accessories
SKU: PJU14126LWF -
Discontinued Products
Type 3R Painted Galvanized Steel Enclosure C3R HCLO Series – (C3R30248HCLO) (DISCONTINUED)
Discontinued ProductsType 3R Painted Galvanized Steel Enclosure C3R HCLO Series – (C3R30248HCLO) (DISCONTINUED)
Application
- Designed for use as a wiring/junction box.
- Provides protection against rain, sleet, snow and dripping water.
Standards
- UL-50 Type 3R
- CSA Type 3R
- Complies with
- NEMA Type 3R
- IEC 60529, IP24
Construction
- Formed and spot welded from 16 gauge galvanized steel (14 gauge when 24″ wide)
- Extended height door and seam-free sides, front and back.
- Galvanized steel lift-off hinges with stainless steel pins.
- Cover fastened securely with zinc plated draw pull catches.
- Provisions for padlocking on zinc-plated draw pull catch.
- Embossed mounting holes on back.
- Foam gasket seal around door opening.
Finish
- Enclosure and cover are finished in ANSI 61 gray powder coating.
Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Enclosure Optional Inner Panel Optional Panel Optional Mount Part No. H W D Part No. H W Mounting Kit Foot Kit C3R864HCLO 8.00 6.00 4.00 14R0505 4.88 4.88 C3RHCLOPK1 C3RHCLOMFK1 C3R886HCLO 8.00 8.00 6.00 14R0705 6.75 4.88 C3RHCLOPK1 C3RHCLOMFK1 C3R1086HCLO 10.00 8.00 6.00 14R0707 6.75 6.88 C3RHCLOPK1 C3RHCLOMFK1 C3R12106HCLO 12.00 10.00 6.00 14R0909 8.75 8.88 C3RHCLOPK1 C3RHCLOMFK1 C3R12126HCLO 12.00 12.00 6.00 14R1109 10.75 8.88 C3RHCLOPK1 C3RHCLOMFK1 C3R16126HCLO 16.00 12.00 6.00 14R1311 12.75 10.88 C3RHCLOPK1 C3RHCLOMFK1 C3R16166HCLO 16.00 16.00 6.00 18P1313 13.00 13.00 C3RHCLOPK2 C3RHCLOMFK2 C3R20166HCLO 20.00 16.00 6.00 18P1713 17.00 13.00 C3RHCLOPK2 C3RHCLOMFK2 C3R20208HCLO 20.00 20.00 8.00 18P1717 17.00 17.00 C3RHCLOPK2 C3RHCLOMFK2 C3R24208HCLO 24.00 20.00 8.00 18P2117 21.00 17.00 C3RHCLOPK2 C3RHCLOMFK2 C3R24248HCLO 24.00 24.00 8.00 18P2121 21.00 21.00 C3RHCLOPK2 C3RHCLOMFK2 C3R30248HCLO 30.00 24.00 8.00 18P2721 27.00 21.00 C3RHCLOPK2 C3RHCLOMFK2 SKU: C3R30248HCLO -
Discontinued Products
(Discontinued) 94-169 CFM Filterfans PF GEN4 Series – (PF43000T12BK)
Features
- Maintains a UL Tested NEMA Type 12 seal against enclosure
- UL Recognized to UL 508A, category NITW2/8, UL File #E175229
- Patented “Click & Fit” design provides a hardware free installation!
- Plastic made from strong, heat resistant ABS-FR, UL 94 V0 fire approved material
- Fan Motor is CSA Approved
- Options: Black Grills
Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Part Number Light Gray RAL7035 Part Number Black RAL9011 Voltage Power Exhaust Filter Light Gray RAL7035 Exhaust Filter Black RAL9011 PF42500T12LG PF42500T12BK 115V 20W PFA40000LG PFA40000BK PF42500T12LG230 PF42500T12BK230 230V 18W PFA40000LG PFA40000BK PF42500T12LG24 PF42500T12BK24 24V 5W PFA40000LG PFA40000BK PF43000T12LG PF43000T12BK 115V 40W PFA40000LG PFA40000BK PF43000T12LG230 PF43000T12BK230 230V 39W PFA40000LG PFA40000BK PF43000T12LG24 PF43000T12BK24 24V 12W PFA40000LG PFA40000BK Airflow data PF 42500 PF 43000 PFA 40000 Filter material NEMA Type 12 Filtermat NEMA Type 12 Filtermat NEMA Type 12 Filtermat Unimpeded airflow 94 CFM 169 CFM – Capacity free-flow 53 W/K I88 W/K – Airflow in combination 67 CFM 142 CFM – (Filterfan + Exhaust Filter) (PF 42500 + PFA 40000) (PF 43000 + PFA 40000) – Capacity in combination 38 W/K 69 W/K – (Filterfan + Exhaust Filter) (PF 43000 + PFA 40000) (PF 43000 + PFA 40000) – Max. static pressure (Airflow = 0 m3/h) 49 Pa 112 Pa – Filtration efficiency 0.91 0.91 0.91 Filter material grade G 4 (DIN EN 779) G 4 (DIN EN 779) G 4 (DIN EN 779) Duty cycle 1 1 – Technical data PF 42500 PF 43000 PFA 40000 AC/DC AC/DC Outside dimensions in mm 252 x 252 x 97 252 x 252 x 113 252 x 252 x 38 (height x width x installation depth) Bearing type / Lagerart ball bearings – Fitting position / Einbaulage any, horizontal airflow preferred any Construction housing and guard of sprayed thermoplastic, self-extinguishing, UL 94 VO Weight 1.18 kg 1.67 kg 0.46 kg Safety protection in accordance with DIN 31 001 Color LG RAL 7035, Light Grey Color BK RAL9011 Black Connections / Anschlussart cage clamp cage clamp – Noise Level (EN ISO 3741) 43 dB (A) 46 dB (A) Supplementary data PF 42500 PF 43000 PFA 40000 Operating temperature – 15 °C (- 5 °F) to / bis + 55 °C (+ 131 °F) Storage temperature – 20 °C (- 4 °F) to / bis + 70 °C (+ 158 °F) Max. relative humidity 0.9 System of protection NEMA Type 12, IP 55 (EN 60 529), when installed as specified Basic Accessories parts kit filter mat, user manual radiant heater, fan heater, thermostat, hygrostat Approvals UL Recognized * Tolerance installation cutout 223 + 1/-0 thickness of material to 2 mm 224 + 1/-0 thickness of material > 2 mm < 3 mm SKU: PF43000T12BK -
Discontinued Products
(Discontinued) 94-169 CFM Filterfans PF GEN4 Series – (PF43000T12LG)
Features
- Maintains a UL Tested NEMA Type 12 seal against enclosure
- UL Recognized to UL 508A, category NITW2/8, UL File #E175229
- Patented “Click & Fit” design provides a hardware free installation!
- Plastic made from strong, heat resistant ABS-FR, UL 94 V0 fire approved material
- Fan Motor is CSA Approved
- Options: Black Grills
Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Part Number Light Gray RAL7035 Part Number Black RAL9011 Voltage Power Exhaust Filter Light Gray RAL7035 Exhaust Filter Black RAL9011 PF42500T12LG PF42500T12BK 115V 20W PFA40000LG PFA40000BK PF42500T12LG230 PF42500T12BK230 230V 18W PFA40000LG PFA40000BK PF42500T12LG24 PF42500T12BK24 24V 5W PFA40000LG PFA40000BK PF43000T12LG PF43000T12BK 115V 40W PFA40000LG PFA40000BK PF43000T12LG230 PF43000T12BK230 230V 39W PFA40000LG PFA40000BK PF43000T12LG24 PF43000T12BK24 24V 12W PFA40000LG PFA40000BK Airflow data PF 42500 PF 43000 PFA 40000 Filter material NEMA Type 12 Filtermat NEMA Type 12 Filtermat NEMA Type 12 Filtermat Unimpeded airflow 94 CFM 169 CFM – Capacity free-flow 53 W/K I88 W/K – Airflow in combination 67 CFM 142 CFM – (Filterfan + Exhaust Filter) (PF 42500 + PFA 40000) (PF 43000 + PFA 40000) – Capacity in combination 38 W/K 69 W/K – (Filterfan + Exhaust Filter) (PF 43000 + PFA 40000) (PF 43000 + PFA 40000) – Max. static pressure (Airflow = 0 m3/h) 49 Pa 112 Pa – Filtration efficiency 0.91 0.91 0.91 Filter material grade G 4 (DIN EN 779) G 4 (DIN EN 779) G 4 (DIN EN 779) Duty cycle 1 1 – Technical data PF 42500 PF 43000 PFA 40000 AC/DC AC/DC Outside dimensions in mm 252 x 252 x 97 252 x 252 x 113 252 x 252 x 38 (height x width x installation depth) Bearing type / Lagerart ball bearings – Fitting position / Einbaulage any, horizontal airflow preferred any Construction housing and guard of sprayed thermoplastic, self-extinguishing, UL 94 VO Weight 1.18 kg 1.67 kg 0.46 kg Safety protection in accordance with DIN 31 001 Color LG RAL 7035, Light Grey Color BK RAL9011 Black Connections / Anschlussart cage clamp cage clamp – Noise Level (EN ISO 3741) 43 dB (A) 46 dB (A) Supplementary data PF 42500 PF 43000 PFA 40000 Operating temperature – 15 °C (- 5 °F) to / bis + 55 °C (+ 131 °F) Storage temperature – 20 °C (- 4 °F) to / bis + 70 °C (+ 158 °F) Max. relative humidity 0.9 System of protection NEMA Type 12, IP 55 (EN 60 529), when installed as specified Basic Accessories parts kit filter mat, user manual radiant heater, fan heater, thermostat, hygrostat Approvals UL Recognized * Tolerance installation cutout 223 + 1/-0 thickness of material to 2 mm 224 + 1/-0 thickness of material > 2 mm < 3 mm SKU: PF43000T12LG -
Discontinued Products
Type 4X Polyester Junction Box w/ Window PJ Series – (PJ16148HW) (DISCONTINUED)
Discontinued ProductsType 4X Polyester Junction Box w/ Window PJ Series – (PJ16148HW) (DISCONTINUED)
Application
- Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
- Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
- Ideal in applications with high temperatures or highly corrosive environments.
Standards
- UL 508A Type 1, 2, 3, 4, 4X, 12 and 13
- CSA Type 1, 2, 3, 4, 4X, 12 and 13
- Complies with
- NEMA Type 1, 2, 3, 4, 4X, 12, & 13
- IEC 60529, IP66
Construction
- Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
- Enhanced UV inhibitors protect against outdoor weathering.
- Standard JIC sizes under 18″x16″.
- Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included.
- Stainless steel draw type “snap latch” door fasteners.
- Door fasteners include a provision for padlocking.
- Enclosures are available with bonded polycarbonate viewing windows.
- Door is supported with a continuous stainless steel hinge.
- Captive oil resistant gasket provides a positive seal.
- Threaded brass inserts are provided for mounting feet to the rear of the enclosure.
- Stainless steel mounting brackets and hardware are provided for mounting to the rear of the enclosure.
- Operating temperatures between 130°C and -40°C (266°F to -40°F).
- Impact index of 6.78J (5 ft/lb).
- For corrosion resistance information, please refer to table in the Technical Information section.
Finish
- Fiberglass polyester material has a gray finish.
- Optional inner panels are available in white powder coated finished steel or unfinished aluminum, or Fiberglass.
Accessories
Additional Inner Panels
Terminal Kit Assemblies
Pole Mounting Kit
PJ/PJU/PCJ Replacement Hardware Kits
PJ Stainless Replacement Mounting Feet
Climate Control
General Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Lift-Off Hinged Snap Latch Twist Latch Enclosure Optional Inner Panel Part No. Part No. Part No. Part No. H W D H W Part No. PJ664W PJ664HW PJ664LW PJ664TW 6.10 6.10 4.18 4.88 4.88 14R0505 PJ864W PJ864HW PJ864LW PJ864TW 8.00 6.12 4.13 6.75 4.88 14R0705 PJ1084W PJ1084HW PJ1084LW PJ1084TW 10.13 8.26 4.13 8.75 6.88 14R0907 PJ1086W PJ1086HW PJ1086LW PJ1086TW 10.13 8.26 6.13 8.75 6.88 14R0907 PJ12106W PJ12106HW PJ12106LW PJ12106TW 12.13 10.26 6.13 10.75 8.88 14R1109 PJ12124W PJ12124HW PJ12124LW PJ12124TW 12.13 12.13 4.13 10.75 10.88 14R1111 PJ12126W PJ12126HW PJ12126LW PJ12126TW 12.13 12.13 6.13 10.75 10.88 14R1111 PJ14126W PJ14126HW PJ14126LW PJ14126TW 14.13 12.26 6.13 12.75 10.88 14R1311 PJ16148W PJ16148HW PJ16148LW PJ16148TW 16.27 14.40 8.13 14.75 12.88 14R1513 PJ18168W PJ18168HW PJ18168LW PJ18168TW 18.40 16.40 8.13 16.88 14.88 P1868 PJ20168W PJ20168HW PJ20168LW PJ20168TW 20.00 16.00 8.13 18.44 14.44 P2068 SKU: PJ16148HW -
Discontinued Products
(Discontinued) Compact LED Light Kit LEDLK Series – (LEDDCMSSCR)
Our compact LED light kit provides efficient lighting solution for most enclosure applications without taking up valuable interior space. Available in magnet or screw mounting and AC or DC power options.
Features
- Housing constructed in transparent plastic.
- Screw or magnet mounting.
- Available with rocker switch or motion sensor.
- Easily connect up to ten (10) light kits together in a daisy chain using LEDXXCORDCON cords.
- Connection: 2-pole plug with snap lock; AC: max. 2.5 A / AC 240 V, white connector; DC: max. 2.5 A / DC 60 V, blue connector.
- Requires hard-wired connection using LEDXXCORDPOWR power cord with leads and plug or power brick (not included).
Specifications
- LED provide 400 Lm at 120° (1,200 Lm at 360° or equivalent 95W light bulb).
- LED temperature 6,000 to 7,000 K.
- Operating / Storage temperature: -22 to +140 °F (-30 to +60 °C) / -40 to +185 °F (-40 to +85 °C).
- Operating / Storage humidity: max. 90 %RH (non-condensing).
- Service life: 60,000 hrs. at 68 °F (20 °C).
- Max. 5 W power consumption (~ 75 W incandescent bulb)
- Protection class / Protection type: II (double insulated) / IP20
Note that the cord on this product is intended to be hard-wired. There are currently no standard plug types for this product.
Gallery
Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
LED Light Kits
Part No. Voltage On/Off Mount LEDACSWMAG 90-260V AC Switch Magnet LEDACMSMAG 90-260V AC Sensor Magnet LEDACSWSCR 90-260V AC Switch Screw LEDACMSSCR 90-260V AC Sensor Screw LEDDCSWMAG 20-60V DC Switch Magnet LEDDCMSMAG 20-60V DC Sensor Magnet LEDDCSWSCR 20-60V DC Switch Screw LEDDCMSSCR 20-60V DC Sensor Screw LED Light Kit Cords
Units shown: inch. Switch units to: mm
Part No. Type Source Length LEDACCORDPOW Power Cord w/leads AC 78.75 LEDDCCORDPOW Power Cord w/leads DC 78.75 LEDACCORDCON Connector/Daisy Chain Cord AC 39.38 LEDDCCORDCON Connector/Daisy Chain Cord DC 39.38 Light Channel Hardware
Part No. Description LCMTG1032 Light channel mounting hardware – 4 x spring nuts/10-32 screws SKU: LEDDCMSSCR -
Discontinued Products
(Discontinued) Compact LED Light Kit LEDLK Series – (LEDDCMSMAG)
Our compact LED light kit provides efficient lighting solution for most enclosure applications without taking up valuable interior space. Available in magnet or screw mounting and AC or DC power options.
Features
- Housing constructed in transparent plastic.
- Screw or magnet mounting.
- Available with rocker switch or motion sensor.
- Easily connect up to ten (10) light kits together in a daisy chain using LEDXXCORDCON cords.
- Connection: 2-pole plug with snap lock; AC: max. 2.5 A / AC 240 V, white connector; DC: max. 2.5 A / DC 60 V, blue connector.
- Requires hard-wired connection using LEDXXCORDPOWR power cord with leads and plug or power brick (not included).
Specifications
- LED provide 400 Lm at 120° (1,200 Lm at 360° or equivalent 95W light bulb).
- LED temperature 6,000 to 7,000 K.
- Operating / Storage temperature: -22 to +140 °F (-30 to +60 °C) / -40 to +185 °F (-40 to +85 °C).
- Operating / Storage humidity: max. 90 %RH (non-condensing).
- Service life: 60,000 hrs. at 68 °F (20 °C).
- Max. 5 W power consumption (~ 75 W incandescent bulb)
- Protection class / Protection type: II (double insulated) / IP20
Note that the cord on this product is intended to be hard-wired. There are currently no standard plug types for this product.
Gallery
Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
LED Light Kits
Part No. Voltage On/Off Mount LEDACSWMAG 90-260V AC Switch Magnet LEDACMSMAG 90-260V AC Sensor Magnet LEDACSWSCR 90-260V AC Switch Screw LEDACMSSCR 90-260V AC Sensor Screw LEDDCSWMAG 20-60V DC Switch Magnet LEDDCMSMAG 20-60V DC Sensor Magnet LEDDCSWSCR 20-60V DC Switch Screw LEDDCMSSCR 20-60V DC Sensor Screw LED Light Kit Cords
Units shown: inch. Switch units to: mm
Part No. Type Source Length LEDACCORDPOW Power Cord w/leads AC 78.75 LEDDCCORDPOW Power Cord w/leads DC 78.75 LEDACCORDCON Connector/Daisy Chain Cord AC 39.38 LEDDCCORDCON Connector/Daisy Chain Cord DC 39.38 Light Channel Hardware
Part No. Description LCMTG1032 Light channel mounting hardware – 4 x spring nuts/10-32 screws SKU: LEDDCMSMAG -
Discontinued Products
Mounting Rack Rail Swing Frame S2CSWF Series – (2CSFT19) (DISCONTINUED)
- Available in 19″ and 24″ widths.
- Variable depth feature allows front to rear adjustment.
- Installs with either left or right hinging.
- Mounts onto Rail Support Kits (not included).
- Clip nuts required for mounting to punched rails.
- Finished in textured black.
- TAA compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
Gallery
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Panel Part No. Fits Console Unit Fits Console Size Width Height A B 2CSFT19 Turrets/Terminal 24,36,48,60 19″ 8U 15.75 19.28 2CSFT24 Turrets/Terminal 36,48,60 24″ 8U 15.75 24.28 2CSFB19 Bases 24,36,48,60 19″ 12U 22.09 19.28 2CSFB24 Bases 36,48,60 24″ 12U 22.09 24.28 SKU: 2CSFT19 -
Discontinued Products
Type 4 Mild Steel Junction Box 1414 N4 Series – (1414N4O10) (DISCONTINUED)
Application
- Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
- Provides protection where equipment may be hosed down or otherwise be very wet, or in outdoor applications for full weather protection.
Standards
- UL 508A Type 3R, 4, 12 and 13
- CSA Type 3R, 4, 12 and 13
- Complies with
- NEMA Type 3R, 4, and 12
- IEC 60529, IP66
Construction
- Body formed from 16 or 14 gauge steel. Covers are formed from 14 gauge steel.
- Smooth, continuously welded seams without knockouts, cutouts or holes.
- Welded brackets provide for enclosure mounting.
- Lift off cover is secured with stainless steel clamps and screws.
- Seamless poured-in place gasket.
- All models larger than 4″ x 4″ include a removable 14 gauge inner panel.
- Internal threaded weld studs are provided for mounting inner panels.
- A bonding stud is provided on the door and a grounding stud is provided on the enclosure.
Finish
- Cover and enclosure are phosphatized, finished in recoatable smooth ANSI 61 gray powder coating.
- Removable inner panel is finished in white powder coating.
Accessories
- Additional Inner Panels
- Terminal Kit Assemblies
Swing Panel Kit
Door Clamping Hardware- Climate Control
- General Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Enclosure Panel Part No. H W D H W 1414N4A¹ 4.00 4.00 3.00 – – 1414N4C 6.00 4.00 3.00 4.88 2.88 1414N4G 8.00 6.00 3.50 6.75 4.88 1414N4E 6.00 6.00 4.00 4.88 4.88 1414N4I 10.00 8.00 4.00 8.75 6.88 1414N4K 12.00 10.00 5.00 10.75 8.88 1414N4M6 14.00 12.00 6.00 12.75 10.88 1414N4O6 16.00 14.00 6.00 14.75 12.88 1414N4M8 14.00 12.00 8.00 12.75 10.88 1414N4O10 16.00 14.00 10.00 14.75 12.88 SKU: 1414N4O10 -
Discontinued Products
Type 4X Polyester Junction Box w/ Window PJU Series – (PJU14126HW) (DISCONTINUED)
Discontinued ProductsType 4X Polyester Junction Box w/ Window PJU Series – (PJU14126HW) (DISCONTINUED)
Application
- Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
- Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
- Ideal in applications with high temperatures or highly corrosive environments.
Standards
- UL 508A Type 1, 2, 3, 4, 4X, 12 and 13
- CSA Type 1, 2, 3, 4, 4X, 12 and 13
- Complies with
- NEMA Type 1, 2, 3, 4, 4X, 12 and 13
- IEC 60529, IP66
Construction
- Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
- Enhanced UV inhibitors protect against outdoor weathering.
- Standard JIC sizes under 18″x16″.
- Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included.
- Various latching options.
- Enclosures are available with bonded polycarbonate viewing windows.
- Door is supported with a continuous stainless steel hinge pin.
- Captive oil resistant gasket provides a positive seal.
- Threaded brass inserts are provided for mounting feet to the rear of the enclosure.
- Operating temperatures between 130°C and -40°C (266°F to -40°F).
- Impact index of 6.78J (5 ft/lb).
- For corrosion resistance information, please refer to table in the Technical Information section.
Finish
- Fiberglass polyester material has a light gray finish.
- Optional inner panels are available in white powder coated finished steel or unfinished aluminum, or Fiberglass.
Accessories
SKU: PJU14126HW -
Discontinued Products
Type 12 Pull Through Wireway 1487 Series – (1487E24) (DISCONTINUED)
Application
- Designed to enclose and protect electrical wiring from dirt, dust, oil and water.
- Ideal for connecting machines to control panels or power sources.
Standards
- UL 870 Type 1 (unless marked¹)
- CSA Type 1 (unless marked¹)
- Complies with
- NEMA Type 12
- IEC 60529, IP54
Construction
- Bodies and covers are formed from 14 gauge steel with 10 gauge steel flanges.
- Continuous flange around wireway ends, requires cables to be pulled through. (For lay-in style, see 1485 Series.)
- Smooth continuously welded seams.
- Interior surfaces are smooth to prevent wire damage during installation.
- Butt hinged covers are secured with easily operated screw clamps.
- Oil resistant gaskets are permanently secured.
- Solid oil resistant gaskets are used between flanges when sections and fittings are bolted together.
- One gasket kit, complete with hardware is provided with each straight section or fitting.
Finish
- Sections and fittings are finished in ANSI 61 gray.
Accessories
SKU: 1487E24 -
Discontinued Products
Filterfan Rainhoods – 4/4X RHN4 Series – (RH40000N4S16) (DISCONTINUED)
Application
- Type 4/4X (IPx6) Rainhoods (when used with PF Series Filterfans)
- Ideal for locations with high exposure to spraying water
- Painted galvanized steel version for Type 4
- 304 and 316 stainless steel versions for Type 4X
- Specially gasketed, 316 stainless steel, sanitary version for FDA compatible Type 4X
- Sold individually
Features
- Easy installation – mounting bracket installed around cutout and rainhood slides down over bracket
- High compression, closed cell black gasket with multiple seal dams ensure tight, waterproof seal
- Sanitary version has special FDA compatible, white multiple seal gasket
- Direct spray barrier/baffle designed to maximize airflow while providing superior protection from overspray
Standards
- UL / cUL Listed Type 4 or 4X (as noted)
- must be used in combination with PF Series Filterfan
Finish
- Base mounting bracket – unpainted 304 SS
- Rainhood Covers
- Type 4 – ANSI61 Gray (GY) or RAL7035 Light Gray (LG) powder coated finish on galvanized steel
- Type 4X – 304 or 316 stainless steel with #4 brushed finish
- Sanitary Type 4X – 316 stainless steel with #4 brushed finish
Grill/Solid Cover Kit
- Can be installed in bottom opening of rain hood
- Grill allows ventilation while preventing unwanted entry of large contaminants
- Solid cover allows sealing of opening when fan/filter not in use
SKU: RH40000N4S16
