cable, vdsl, patch
|
We carry CAT6 PVC and CAT 6 Plenum cable from Belden, Berktek, Commscope, Essex, General, AMP, Mohawk, Systimax and more.Please call us today at (866) 650-DATA Category 6 (CAT 6) technology is rapidly growing in the telecommunications industrys commercial market. CAT 6 has been under development since late 1997. Originally, the wiring was intended to go from the 100 MHz capability of CAT 5 to 200 MHz, but later that was revised to 250 MHz. CAT 6 provides for other metrics as well, variables that become important at high bandwidth rates. These include crosstalk, or interference between wire pairs, and skew, the difference in timing of signals on the wires. CAT 6 is the latest type of four pair twisted copper cable designed for high speed data transmission. CAT 5 was initially touted as the last cable you'll ever need, but then came Gigabit Ethernet, which pushed the technology to its limits and used all four pairs of wires in the cable. So, manufacturers started making, "enhanced", versions of the cable (hence the "E”). Bandwidth precedes data rates just as highways come before traffic. Doubling the bandwidth is like adding twice the number of lanes on a highway. The trends of the past and the predictions for the future indicate that data rates have been doubling every 18 months. Current applications running at 1 Gb/s are really pushing the limits of Category 5E cabling. As streaming media applications such as video and multi-media become increasingly commonplace, the demands for faster data rates will increase and spawn new applications that will benefit from the higher bandwidth offered by Category 6. This is exactly what happened in the early ’90s when the higher bandwidth of Category 5 cabling compared to Category 3 caused h Cords
___m and CAT 6 PVC
So,
when someone refers to 568A, are they talking about the standard,
or the wiring scheme? The answer, is that it depends on the context.
If they were to say "The entire office fully complies with 568A",
obviously, they would be talking about the standard. If they were
to say "The jacks and patch panels are all 568A", then they would
be referring to the wiring scheme. e 568A Standard. The reason was that at the time, a great deal of cabling plants had been installed to the B standard (formerly known as WECO or AT&T 258A). Even though they allowed both wiring methods, they stated in their standard that 568A wiring would be the preferred method for all new installations. Time, and popular
Category 6 (CAT 6) technology is rapidly growing in the telecommunications industry’s commercial market. CAT 6 has been under development since late 1997. Originally, the wiring was intended to go from the 100 MHz capability of CAT 5 to 200 MHz, but later that was revised to 250 MHz. CAT 6 provides for other metrics as well, variables that become important at high bandwidth rates. These include crosstalk, or interference between wire pairs, and skew, the difference in timing of signals on the wires.
American Tele Data Data Supply carries thousands of types of cables from the below manufacturers for CAT 5e cable, CAT 5e Plenum, CAT 6 plenum, CAT 6 cable and Outdoor Rated CAT 5e Cable
Our ADS 763108 CAT 5e Outoor Cable: ListPrice: $ 310/1000 feet, Our Price $ 189.99/1000 Feet- Discount Available!!Call (866) 342-3721 Our ADS 763108 CAT 5e Outoor Cable-1000' Outdoor Rated Category 5e Heavy Duty Industrial Grade Ethernet Cable is not the same as you can buy at 'retails stores that is rated as "indoor-outdoor'- this is the real mccoy and can be direct buried into the ground. Order Part Number:
Dielectric
Cables Outdoor OSP Cables
UltraPipe Category 6e+ cables exceed all proposed Category 6 specifications and provides superior bandwidth performance up to 550Mhz to support broadband video and high-speed full-duplex transmission protocols. It defines a new level of performance with a 300% improvement in PowerSum Crosstalk and a 60% improvement in return loss over Category 6. UltraPipe's patented design includes the revolutionary Isolator pair separator, which resolves NEXT and ELFEXT issues required for accurate transmission using all four pairs.
Engineered specifically for high-speed, full-duplex, parallel transmission protocols that dominate new technologies, UltraMedia's patented design, which includes the revolutionary Isolator pair separator, resolves ELFEXT and balance issues required for accurate transmission using all four pairs. Specified to 400Mhz, UltraMedia provides the performance margin against Category 6 requirements necessary for bandwidth intensive applications such as 3D imaging and Gigabit Ethernet.
The
Commscope Media 6 meets all Category 6 specification to support
broadband video and high speed, full-duplex transmission protocols
that new technologies demand. Features include a flexible jacket,
thousand to zero footage markers, vibrant colored pairs with a co-extruded
color stripe for easy identification, and a smaller OD than typical
Category 6 products
d Cable (Call For Minimum Order)
Call Us For a Custom Quote Today For All Your Cable Needs (866) 650-DATA
Wholesale CAT 6 Cable- CAT 6 Cable CAT 6 Cable-Wholesale Cable- Plenum CAT 6 Cable- PVC CAT6 Cable-Enhanced CAT 6 Cable- Category 5e Cable- Category 6 Cable- 4 Pair Plenum Cable- CAT 6 Cable- Outdoor Rated CAT 5e Cable- Smart Home Cable- Media Twist Cable- 350 MHZ UTP Cable
----------- We Stock CAT 6 Plenum Cable- 550 MHZ Everyday for $ 399.00
Applications SUPPORTS
CURRENT CATEGORY FIVE APPLICATIONS SUCH AS 100 BASE TX, 100 BASE
VG ANYLAN, AND 155 ATM. IDEAL FOR USE IN HIGH BANDWIDTH EXISTING
OR FUTURE APPLICATIONS SUCH AS 622 ATM AND GIGABIT ETHERNET. 1000 UTP cable is intended for current
future and high-speed data and multimedia applications including:
American Tele Data now has one of the largest supplies and selections of CAT 6 Cable-CAT 6 patch cords and CAT 6 patch cables- Due to rapidly fluctuating market prices on commodities such as oil- copper- etc that make up CAT 5e Cable and CAT 6 cable - Please call (866) 342-3721 For Latest Pricing
American Tele Data also offer tremendous DISCOUNTS and will MEET or BEAT any USA based pricing for BULK CAT 5e and CAT 6 Cables- Please call us at (866) 342-3721 for pallet pricing with cable prices as low as $ 125/1000 feet.
Applications : Berk-Tek's
LANmark-1000 UTP cable is intended for future and high-speed data
and multimedia applications including:
|
![]() |
![]() ![]() |
American Tele Data offers a wide variety of CAT 6 cable including our wholesale cat 6 cable including CAT 6 cable UTP twisted pair cables ranging from CAT 6 Plenum cable, CAT 6 Cable from Commscope's 5504M, Belden's Media Twist and Helix Hi Temps's equivalent's CAT 6 enhanced cables.We also have a full range of PVC CAT 6 rated cables, CAT 5e, outdoor rated CAT 5e cable, CAT 6, and CAT 6 Plenum enhanced, Smart Cable, and indoor/outdoor rated cable to suit your needs from several manufacturers. CommScope's CAT 6 cable offers unshielded twisted pair cable technology that is designed to serve the high speed local area network marketplace. CommScope's Network products are among the highest performing twisted pair products on the market. We have great pricing on Category 6 Enhanced -CAT 6 Cable equivalent to the Belden 7852A Cable for about 40% less.
American Tele Data CARRIES CA6 CABLE BULK CABLE FROM THE BELOW MANUFACTURERS AND MORE!
![]() |
![]() |
![]() |
![]() |
![]() |
---|---|---|---|---|
![]() |
![]() |
![]() |
We carry CAT6 PVC and CAT 6 Plenum cable from Belden, Berktek, Commscope, Essex, General, AMP, Mohawk, Systimax and more.Please call us today at (866) 650-DATA
Category 6 (CAT 6) technology is rapidly growing in the telecommunications industry’s commercial market. CAT 6 has been under development since late 1997. Originally, the wiring was intended to go from the 100 MHz capability of CAT 5 to 200 MHz, but later that was revised to 250 MHz. CAT 6 provides for other metrics as well, variables that become important at high bandwidth rates. These include crosstalk, or interference between wire pairs, and skew, the difference in timing of signals on the wires. CAT 6 is the latest type of four pair twisted copper cable designed for high speed data transmission. CAT 5 was initially touted as the last cable you'll ever need, but then came Gigabit Ethernet, which pushed the technology to its limits and used all four pairs of wires in the cable. So, manufacturers started making, "enhanced", versions of the cable (hence the "E”). Bandwidth precedes data rates just as highways come before traffic. Doubling the bandwidth is like adding twice the number of lanes on a highway. The trends of the past and the predictions for the future indicate that data rates have been doubling every 18 months. Current applications running at 1 Gb/s are really pushing the limits of Category 5E cabling. As streaming media applications such as video and multi-media become increasingly commonplace, the demands for faster data rates will increase and spawn new applications that will benefit from the higher bandwidth offered by Category 6. This is exactly what happened in the early ’90s when the higher bandwidth of Category 5 cabling compared to Category 3 caused most local area network (LAN) applications to choose the better media to allow simpler, cost effective, higher speed LAN applications, such as 100BASE-TX. It is also important to note that cabling infrastructure is generally considered a 10 year investment as opposed to one or three years for electronics or software.
|
![]() |
|
Category:
Voice and Data |
|
|
Price |
|
|
|
$ 1.10 each |
|
|
|
$ 1.79 each |
|
|
|
$2.19 each |
|
|
|
$ 2.69 each |
|
|
|
$ 3.39 each |
|
|
|
$ 3.89 each |
|
|
|
$3.99 each |
|
|
|
$ 6.29 each |
|
|
|
$ 7.69 each |
|
|
|
$ 12.59 each |
CAT 6 Shielded Patch Cords
|
|
|
|
|
* STP Shielded Twist Pair * Foil Shield on individual Pair/Braid shield on 4 pair * CM Type PVC Jacket * 26AWG 4pair Stranded Copper Wire * 50 Micron Gold Plated RJ45 Plug * Molded Boot on Each End * Cable Length marked on Boot |
|
|
1 foot-2Foot-3Foot-5Foot-7Foot-10Foot- 15Foot- 25Foot- 50 Foot-75 Foot-100 Foot- 150 Foot Length |
* STP Shielded Twist Pair * Foil Shield on individual Pair/Braid shield on 4 pair * CM Type PVC Jacket * 26AWG 4pair Stranded Copper Wire * 50 Micron Gold Plated RJ45 Plug * Molded Boot on Each End * Cable Length marked on Boot |
|
|
|
* STP Shielded Twist Pair * Foil Shield on individual Pair/Braid shield on 4 pair * CM Type PVC Jacket * 26AWG 4pair Stranded Copper Wire * 50 Micron Gold Plated RJ45 Plug * Molded Boot on Each End * Cable Length marked on Boot |
|
|
|
* STP Shielded Twist Pair * Foil Shield on individual Pair/Braid shield on 4 pair * CM Type PVC Jacket * 26AWG 4pair Stranded Copper Wire * 50 Micron Gold Plated RJ45 Plug * Molded Boot on Each End * Cable Length marked on Boot |
|
|
|
* STP Shielded Twist Pair * Foil Shield on individual Pair/Braid shield on 4 pair * CM Type PVC Jacket * 26AWG 4pair Stranded Copper Wire * 50 Micron Gold Plated RJ45 Plug * Molded Boot on Each End * Cable Length marked on Boot |
|
|
|
* STP Shielded Twist Pair * Foil Shield on individual Pair/Braid shield on 4 pair * CM Type PVC Jacket * 26AWG 4pair Stranded Copper Wire * 50 Micron Gold Plated RJ45 Plug * Molded Boot on Each End * Cable Length marked on Boot |
|
|
|
* STP Shielded Twist Pair * Foil Shield on individual Pair/Braid shield on 4 pair * CM Type PVC Jacket * 26AWG 4pair Stranded Copper Wire * 50 Micron Gold Plated RJ45 Plug * Molded Boot on Each End * Cable Length marked on Boot |
|
CAT 6 Outdoor Rated Cable -Standard-Part
Number: ATDCAT6-OSP CAT6 250MHz,
Cable, 24AWG, UTP, 4 Pairs, Solid, 1000', UV Jacket for Outdoor
Use, (CMX) Cable, Black -
SEE SPECIFICATIONS
Part Number: ATDCAT6-OSP Cost $ 299.00 /1000 FT- Volume discounts apply to as low as $ 239/1000 fe2t in quantities 25+- please call first for details as American Tele Data is not responsible for rapid changes due to oil/copper costs
Volume Price $ 259.00 - Ten (10) or more Boxes
Outdoor
Rated -Outdoor Shielded CAT 5e and CAT 6 Patch Cords
Outdoor Rated CAT 6 Patch Cords
Cat 6 is completely backward-compatible with current Cat5e equipment. Our Cat 6 Cables are composed of 4 pairs 24 AWG stranded conductors with PVC jackets. Conductors are wired to gold plated RJ45 plugs in accordance with the TIA/EIA 568B standard (Telephone Industry Association/Electronics Industry Association.) They consist of a foil shield with drain wire to protect signals from external noise. Available in nine colors. Boots match cable color. Custom modular cable assemblies are available.
Part Number
|
Outdoor
Rated CAT 6 Patch Cords |
Color
|
Price
|
560-125-050-OSP-C6 |
50
Foot Outdoor Rated CAT 6Patch Cables |
Black
|
$ 55.10
|
560-125-100-OSP-C6 |
100
Foot Outdoor Rated CAT 6 Patch Cables |
Black
|
$ 69.60 |
560-125-125-OSP-C6 |
125
Foot Outdoor Rated CAT 6Patch Cables |
Black
|
$ 72.00 |
560-125-150-OSP-C6 |
150
Foot Outdoor Rated CAT 6 Patch Cables |
Black
|
$ 104.40 |
560-125-175-OSP-C6 |
175Foot
Outdoor Rated CAT 6 Patch Cables |
Black
|
$ 127.60 |
560-125-200-OSP-C6 |
200
Foot Outdoor Rated CAT 6 Patch Cables |
Black
|
$ 156.60 |
560-125-225-OSP-C6 |
225
Foot Outdoor Rated CAT 6 Patch Cables |
Black
|
$ 171.10 |
560-125-250-OSP-C6 |
250Foot
Outdoor Rated CAT 6 Patch Cables |
Black
|
$ 185.60 |
560-125-275-OSP-C6 |
275
Foot Outdoor Rated CAT 6 Patch Cables |
Black
|
$ 199.00
|
Custom
Lengths-Call |
Custom Outdoor Patch
Cords- Call |
Black |
CALL |
550 MHZ CAT 6 Cable- Avaialable in CAT 6 Plenum and CAT 6 PVC
CAT6
Bulk Cable- CAT 6 Plenum and CAT 6 PVC Cable Specifications
Below |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
CAT
3-CAT 3 LAN Cable Composite
Cable
Call Today For Up To Date Pricing (866) 342-3721 or (866) 650-3282
Our outdoor rated CAT
5e cable is available in 500 foot- 1000 foot reels as well as
custom lengths- since the outdoor rated CAT 5e cable is based
on the cost of oil-you need to call us at (866) 342-3721 to get
the latest pricing. Generally the outdoor rated CAT 5e Cable costs
from$ 150-$ 195 per 1000 foot reel. With custom lengths of the
utdor rated CAT 5e cable there is also a cut charge. We can normally
ship the same day of order is placed before
1pm Pacific Time.
![]() |
![]() |
![]() |
![]() |
![]() |
---|---|---|---|---|
![]() |
![]() |
![]() |
CAT 5e- Cat 6- CAT 6 Cable Tutorial
Category 5 Cable (UTP) (Unshielded Twisted Pair) | A multipair (usually 4 pair) high performance cable that consists of twisted pair conductors, used mainly for data transmission. Note: The twisting of the pairs gives the cable a certain amount of immunity from the infiltration of unwanted interference. category-5 UTP cabling systems are by far, the most common (compared to SCTP) in the United States. Basic cat 5 cable was designed for characteristics of up to 100 MHz. Category 5 cable is typically used for Ethernet networks running at 10 or 100 Mbps. | ||||
Category 5 E Cable (enhanced) | Same as Category 5, except that it is made to somewhat more stringent standards. The Category 5 E standard is now officially part of the 568A standard. Category 5 E is recommended for all new installations, and was designed for transmission speeds of up to 1 gigabit per second (Gigabit Ethernet). | ||||
Category 6 | Same as Category 5 E, except that it is made to a higher standard. The Category 6 standard is now officially part of the 568A standard. | ||||
Category 7 | Same as Category 6, except that it is made to a higher standard. The Category 7 standard is still in the works (as of this writing) and is not yet part of the 568A standard. One major difference with category 7's construction (as compared with category 5, 5 E, and 6) is that all 4 pairs are individually shielded, and an overall shield enwraps all four pairs. Category 7 will use an entirely new connector (other than the familiar RJ-45). | ||||
Category 5 Cable (SCTP) (Screened Twisted Pair) | Same as above, except that the twisted pairs are given additional protection from unwanted interference by an overall shield. There is some controversy concerning which is the better system (UTP or SCTP). Category 5 SCTP cabling systems require all components to maintain the shield, and are used almost exclusively in European countries. | ||||
Category
5E, RJ45 jack (Work Area Outlet) |
An 8 conductor, compact, modular, female jack that is used to terminate category-5E cable at the user (or other) location. The jack is specifically engineered to maintain the performance of cat 5E cabling. | ||||
Category 5E Patch Panel | A Category 5E Patch Panel is basically just a series of many category-5E jacks, condensed onto a single panel. Common panel configurations are 12, 24, 48, and 96 ports. Patch panels are typically used where all of the horizontal cable sections meet, and are used to connect the segments to the Network Hub. | ||||
Category 5E Patch Cable | A Category 5E Patch Cable consists a length of cat 5E cable with an RJ-45 male connector, crimped onto each end. The cable assembly is used to provide connectivity between any two category-5E female outlets (jacks). The two most common are from hub to patch panel, and work area outlet (jack) to the computer. | ||||
EIA/TIA 568A Standard | This standard was published in July of 1991. The purpose of EIA/TIA 568A, was to create a multiproduct, multivendor, standard for connectivity. Prior to the adoption of this standard, many "proprietary" cabling systems existed. This was very bad for the consumer. Among other things, the standard set the minimum requirements for category 5E cable and hardware. The 568 "standard" is not to be confused with 568A or 568B wiring schemes, which are themselves, part of the "568A standard". | ||||
568A and 568B Wiring Schemes | When we refer to a jack or a patch panel's wiring connection, we refer to either the 568A, or 568B wiring scheme, which dictates the pin assignments to the pairs of cat 5E cable. It is very important to note that there is no difference, whatsoever, between the two wiring schemes, in connectivity or performance when connected form one modular device to another (jack to Patch panel, RJ-45 to RJ-45, etc.), so long as they (the two devices) are wired for the same scheme (A or B). The only time when one scheme has an advantage over the other, is when one end of a segment is connected to a modular device, and the other end to a punch block. In which case, the 568A has the advantage of having a more natural progression of pairs at the punch block side. More on 568 A&B later on. | ||||
Four Pairs |
|
||||
Wiremap | This is the most basic test that can be performed on a category-5E segment. Wiremap tests for the basic continuity between the two devices. In 568A or B, all eight pins of each device should be wired straight through (1 to 1, 2 to 2, 3 to 3, etc.). A wiremap (continuity) test, should also test for absence of shorts, grounding, and external voltage. | ||||
Crosstalk | Crosstalk is the "bleeding" of signals carried by one pair, onto another pair through the electrical process of induction (wires need not make contact, signals transferred magnetically). This is an unwanted effect, that can cause slow transfer, or completely inhibit the transfer of data signals over the cable segment. The purpose of the wire twists, in category 5E cable is to significantly reduce the crosstalk, and it's effects. Two types are: NEXT (Near End Crosstalk), and FEXT (Far End Crosstalk). Fiber Optic cable is the only medium that is 100% immune to the effects of crosstalk. | ||||
Ambient Noise or Electromagnetic Interference (EMI) | Similar to crosstalk, in that it is an unwanted signal that is induced into the cable. The difference is that ambient noise (or EMI) is typically induced from a source that is external to the cable. This could be an electrical cable or device, or even an adjacent category 5E cable. | ||||
Attenuation | Attenuation is the loss of signal in a cable segment due to the resistance of the wire plus other electrical factors that cause additional resistance (Impedance and Capacitance for example). A longer cable length, poor connections, bad insulation, a high level of crosstalk, or ambient noise, will all increase the total level of attenuation. The 568A standard, specifies the maximum amount of attenuation that is acceptable in a category-5E cable segment. |
So, when someone refers to 568A, are they talking
about the standard, or the wiring scheme? The answer, is that
it depends on the context. If they were to say "The entire office
fully complies with 568A", obviously, they would be talking about
the standard. If they were to say "The jacks and patch panels
are all 568A", then they would be referring to the wiring scheme.
The 568 committee, with good intentions, decided to allow both
wiring methods (568A & 568B) to exist within the 568A Standard.
The reason was that at the time, a great deal of cabling plants
had been installed to the B standard (formerly known as WECO or
AT&T 258A). Even though they allowed both wiring methods,
they stated in their standard that 568A wiring would be the preferred
method for all new installations. Time, and popular opinion, went
in the other direction. The most popular wiring method today is
568B. Having both A & B methods does nothing but cause errors
and confusion. Originally, patch panels and jacks were manufactured
either A or B. In most cases, they were not labeled as such. Most
suppliers stocked only the B wired products. Luckily, today, almost
all jacks and patch panels show diagrams for both A and B. The
only difference between the two is the interchanging of the 2nd
and 3rd pairs (white/orange and white/green, respectively).
So which method to choose? As we stated earlier; There is no difference,
whatsoever, between the two wiring schemes, in connectivity or
performance when connected form one modular device to another.
The answer, is that it does not matter at all, unless you are
terminating one end onto a punch block, in which case, the A method
has an advantage. The main thing is that you choose one method,
and stick with it. I recommend to all installers that they terminate
one segment on both the jack and patch panel sides, and test for
proper continuity. It has happened to many professionals, where
they terminated the entire installation, and then discovered that
the two ends were wired for different methods. Then they had to
re-terminate all of the cables on one end completely to correct
the situation.
The following charts should be very helpful in illustrating the
difference between the A & B methods. For those who are not
familiar with telephony, tip (T) refers to the positive (+) side,
and ring (R) refers to the negative side of the circuit. The white/blue
pair (the first pair in the cable) consists of two wires that
are twisted together. They are the white/blue (tip) and the blue/white
(ring). The white/blue wire is predominately white with a blue
stripe. The blue/white is the inverse, predominately blue with
a white stripe.
Parameter | Category
5 and Class D with additional requirements TSB95 and FDAM 2 |
Category
5E ('568-A-5) |
Category 6 Class E (Performance at 250 MHz shown in parentheses) |
Proposed Category 7 Class F (Performance at 600 MHz shown in parentheses) |
Specified frequency range | 1-100 MHz | 1-100 MHz | 1-250 MHz | 1-600 MHz |
Attenuation | 24 dB | 24 dB | 21.7 dB (36 dB) |
20.8 dB (54.1 dB) |
NEXT | 27.1 dB | 30.1 dB | 39.9 dB (33.1 dB) |
62.1 dB (51 dB) |
Power-sum NEXT | N/A* | 27.1 dB | 37.1 dB (30.2 dB) |
59.1 dB (48 dB) |
ACR | 3.1 dB | 6.1 dB | 18.2 dB (-2.9 dB) |
41.3 dB (-3.1 dB)** |
Power-sum ACR | N/A | 3.1 dB | 15.4 dB (-5.8 dB) |
38.3 dB (-6.1 dB)** |
ELFEXT | 17 dB (new requirement) |
17.4 dB | 23.2 dB (15.3 dB) |
ffs*** |
Power-sum ELFEXT | 14.4 dB (new requirement) |
14.4 dB | 20.2 dB (12.3 dB) |
ffs*** |
Return loss | 8 dB* (new requirement) |
10 dB | 12 dB (8 dB) |
14.1 dB (8.7 dB) |
Propagation delay | 548 nsec | 548 nsec | 548 nsec (546 nsec) |
504 nsec (501 nsec) |
Delay skew | 50 nsec | 50 nsec | 50 nsec | 20 nsec |
Category 5E Bulk Cable
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Category 6 (CAT 6) technology is rapidly growing in the telecommunications industry’s commercial market. CAT 6 has been under development since late 1997. Originally, the wiring was intended to go from the 100 MHz capability of CAT 5 to 200 MHz, but later that was revised to 250 MHz. CAT 6 provides for other metrics as well, variables that become important at high bandwidth rates. These include crosstalk, or interference between wire pairs, and skew, the difference in timing of signals on the wires.
American Tele Data
Will Custom Cut Your OSP CAT 5e or CAT 6 Cable and
Connectorize Your Outside Plant Cable- and SHIP IT THE SAME DAY! ( for an additional cost)
Why Go CAT 6 Cable?
Most
Orders Received Before 1PM PST Ship The Same Day-CALL (866)
650-3282 |
![]() |
American Tele Data carries thousands of types of cables from the below manufacturers for CAT 5e cable, CAT 5e Plenum, CAT 6 plenum, CAT 6 cable and Outdoor Rated CAT 5e Cable
Outdoor
Rated CAT 5e and CAT 6 Patch Cords
OUTDOOR
Rated CAT 5e
CABLE
& Patch Cords
CAT
5e Outdoor Cable: Part # American Tele Data763108 CAT 5e Outdoor Cable-1000'
Outdoor Rated Category 5e Heavy Duty Industrial Grade Ethernet
Cable - Sunlight/UV/Oil Resistant Jacket Suitable for Burial -
Unshielded with Unbonded Pairs - Black Coat, PC Connection's Enhanced
Category 5e Flooded Outdoor Ethernet cable is made from 4-pair,
24AWG solid copper wire, enclosed in an outdoor rated, moisture
and chemical resistant black polyethylene jacket. Flooding compound
surrounds the twisted pairs, providing additional moisture protection.
This cable is engineered to meet or exceed ANSI/TIA/EIA 568-B.2
performance criteria for 10/100/1000BaseT Ethernet applications-Extreme
outdoor gel filled, UV rated, plenum, Cat 5e cable. Perfect for
extreme weather conditions. Can be ran exposed or buried.
American Tele Data
763108 CAT 5e Outdoor Cable-1000' Outdoor Rated
Category 5e Heavy Duty Industrial Grade Ethernet Cable - Sunlight/UV/Oil
Resistant Jacket Suitable for Burial - Unshielded with Unbonded
Pairs - Black Coat, PC Connection's Enhanced Category 5e Flooded
Outdoor Ethernet cable is made from 4-pair, 24AWG solid copper
wire, enclosed in an outdoor rated, moisture and chemical resistant
black polyethylene jacket. Flooding compound surrounds the twisted
pairs, providing additional moisture protection. This cable is
engineered to meet or exceed ANSI/TIA/EIA 568-B.2 performance
criteria for 10/100/1000BaseT Ethernet applications-Extreme
outdoor gel filled, UV rated, plenum, Cat 5e cable. Perfect for
extreme weather conditions. Can be ran exposed or buried.
American Tele Data
765108 CAT 6 Outdoor Cable-1000' Outdoor Rated CAT 6-
Category 6-Heavy Duty Industrial Grade Ethernet Cable - Sunlight/UV/Oil
Resistant Jacket Suitable for Burial - Unshielded with Unbonded
Pairs - Black Coat, PC Connection's Enhanced Category 5e Flooded
Outdoor Ethernet cable is made from 4-pair, 24AWG solid copper
wire, enclosed in an outdoor rated, moisture and chemical resistant
black polyethylene jacket. Flooding compound surrounds the twisted
pairs, providing additional moisture protection. This cable is
engineered to meet or exceed ANSI/TIA/EIA 568-B.2 performance
criteria for 10/100/1000BaseT Ethernet applications-Extreme
outdoor gel filled, UV rated, plenum, Cat 6e cable. Perfect for
extreme weather conditions. Can be ran exposed or buried. THIS
IS CATEGORY 6 -CAT 6 Outdoor cable.
Part
# 765108 CAT 6 Outdoor Cable Spec's- Outdoor
Cat 6 pdf
Our American Tele Data763108 CAT 5e Outoor Cable: ListPrice: $ 310/1000 feet, Our Price $ 189.99/1000 Feet- Discount Available!!Call (866) 342-3721
Our American Tele Data763108 CAT 5e Outoor Cable-1000' Outdoor Rated Category 5e Heavy Duty Industrial Grade Ethernet Cable is not the same as you can buy at 'retails stores that is rated as "indoor-outdoor'- this is the real mccoy and can be direct buried into the ground.
Order Part Number:
American Tele Data
763108 CAT 5e Outoor Cable (Custom Lengths Available!-
American Tele Datawill cut, and terminate your CAT 5e Outdoor Rated Cable- SAME
DAY SHIPPINg available for additional cost.
American Tele Data
763208 Aluminum Shielded Cable (Call For Minimum Order)
-Aluminuml Shielded Cable (Call For Minimum rder)-1000FT OSP Broadband
Cat5e Steel Shielded Cable - 4 pair-Category 5e OSP cables are
designed to provide extension of the LAN beyond the premises.
AluminumShielded for protection against EMI/RFI. A variety of
constructions are available to suit multiple environmental needs.
American Tele Data
763308 Steel Shielded Cable (Call For Minimum Order)-1000FT
OSP Broadband Cat5e Steel Shielded Cable - 4 pair-Category 5e
OSP cables are designed to provide extension of the LAN beyond
the premises. Steel Shielded for protection against EMI/RFI. A
variety of constructions are available to suit multiple environmental
needs.The ultimate in OSP rated CAT 5e cable.
SPECIFICATIONS
ACR (Minimum)—Typical: 30.5 dB/100 m (328.1
ft.) at 100 MHz
Attenuation (Maximum)—22 dB/100 m (328.1
ft.) at 100 MHz
Conductor—24 AWG, solid, insulated copper
Insulation—HD-polyethylene;
Nominal diameter: Standard: 0.23", (0.58 cm); Armored: 0.34" (0.86
cm)
Jacket—UV-resistant, abrasion-resistant polyethylene
NEXT (Minimum)—Typical: 51.7 dB/100 m (328.1 ft.) at 100
MHz
PS-NEXT (Minimum)—Typical: 44.8 dB/100
m (328.1 ft.) at 100 MHz
Return Loss (Minimum)—Typical: 21.2 dB/100
m (328.1 ft.) at 100 Hz
Time Delay Skew (Maximum)—25 nanoseconds
Temperature— -94° to +167° F (-70°
to +75° C)
American Tele Data also offers wholesale priced CAT 5e Cable via "pallet purchasing" in 1000 foot reels for less than $40.00 per box. Plenum CAT 5e plenum at pallet pricing is from $ 70-$85.00 per 1000 foot reel.Please call for details at (866) 650-DATA.
Dielectric
Cables Outdoor OSP Cables
Military Cables
Security Cables
Indoor- Outdoor Cables
Datacom/Central Office Cables
Category
6 UTP (SuperCAT1000) plenum (805508), non-plenum (705508)
and patch cables (705708) with 200 MHz bandwidth that
deliver 2.4 GHz performance Equivalent
TO BELDEN Media Twist
Part Number 7852A at 40% Less!! |
UltraPipe
UltraPipe Category 6e+ cables exceed all proposed Category 6 specifications and provides superior bandwidth performance up to 550Mhz to support broadband video and high-speed full-duplex transmission protocols. It defines a new level of performance with a 300% improvement in PowerSum Crosstalk and a 60% improvement in return loss over Category 6. UltraPipe's patented design includes the revolutionary Isolator pair separator, which resolves NEXT and ELFEXT issues required for accurate transmission using all four pairs.
6ECMP
4 pair non 3x1
6ECMR
4 pair non-plenum
6EJCM
4 pair patch cord
UltraMedia
Cable
Engineered specifically for high-speed, full-duplex, parallel transmission protocols that dominate new technologies, UltraMedia's patented design, which includes the revolutionary Isolator pair separator, resolves ELFEXT and balance issues required for accurate transmission using all four pairs. Specified to 400Mhz, UltraMedia provides the performance margin against Category 6 requirements necessary for bandwidth intensive applications such as 3D imaging and Gigabit Ethernet.
7504
4 pair plenum
75N4
4 pair non-plenum
6NF4 4 pair
outdoor
Media
6
The Commscope
Media 6 meets all Category 6 specification to support broadband
video and high speed, full-duplex transmission protocols that
new technologies demand. Features include a flexible jacket,
thousand to zero footage markers, vibrant colored pairs with
a co-extruded color stripe for easy identification, and a smaller
OD than typical Category 6 products
4 pair plenum
Residential
Cabling Products
When it comes to residential cabling, look to CommScope to provide
the solution. Our UltraHome® cables meet the needs of voice,
data, and video applications in one easy-to-install product.
The UltraHome family consists of coaxial cable, Category 5e
unshielded twisted pair, and multimode fiber in single, Siamese,
and bundled configurations designed for delivering true multimedia
inside the home.
Recently,
CommScope introduced their expanded Residential Cabling line.
The Residential Cabling catalog contains 20 new coaxial, fiber,
and UTP cables for residential voice, data, and video applications
in single, Siamese, and bundled designs. CommScope's UltraHome®
residential cabling products provide the foundation to support
the capabilities of today's technology as well as those of the
future.
DRAKA- Helix -Hi Temp Products
Category 6 UTP (SuperCAT1000) plenum (805508),
non-plenum (705508) and patch cables (705708) with 200 MHz bandwidth
that deliver 2.4 GHz performance
Enhanced Category 5e UTP (SuperCAT360) plenum (804508), non-plenum
(704508) and patch cables (704708) tested to 360 MHz for extended
Category 5e performance
Category 5e UTP (SuperCAT100E) plenum (803308), non-plenum
(703408) and patch cables (701308) that meet all Category 5e
performance criteria
Category 5e UTP for outdoor applications (All Weather SuperCAT)
for direct buried, duct or aerial applications (763108) when
Cat5e performance is needed to withstand weather or temperature
extremes - aluminum armored (763208) and steel armored (763308)
versions available
Category 5 (SuperCAT100) plenum (803508), non-plenum (703108)
and patch cables (701008) delivering solid 100 MHz Category
5 performance - 25 pair versions are available in plenum (803150)
and non-plenum (703150) constructions
Category 3 UTP - plenum (801308), non-plenum (702308) and patch
cables (700708) available - 25 pair versions are available in
plenum (801350) and non-plenum (702350) constructions - patch
cables available in 2, 3 and 4 pair
Local
Area Network Products - Category 5e+
5504M
4 pair plenum 3x1
5504
4 pair plenum 4x0
55N4R 4
pair non-plenum
5524M 8
pair plenum 3x1
5N54
8 pair non-plenum
5NF4
4 pair outdoor
OUTSIDE RATED CAT 5e CABLE
This all weather SuperCAT cable is an outdoor rated CAT 5e cable that can be installed directly in the ground, inside a duct or aerially lashed to a support member. The cable is fully flooded and has a tough UV and abrasion resistant black polyethlene jacket. The cable is designed to withstand temperatures as low as -70degrees C (Celsius) and as high as 75 degress C. Data transmission rates are up to 100Ms/second. This cable is the ideal solution for connecting LAN terminal locations outside the main building such as portable classrooms without the need to use expensive optical fiber systems.Optional aluminum or steel shielding systems provide addtional protection for EMI and damage caused by rodents.
Order Part Number:
American Tele Data763108 CAT 5e Outoor Cable (Custom Lengths Available!)
American Tele Data763208 Aluminum Shielded Cable (Call For Minimum Order)
American Tele Data763308 Steel Shielded Cable (Call For Minimum Order)
Call Us
For a Custom Quote Today For All Your Cable Needs (866) 650-DATA or Click On The Spinning Words to BUY ONLINE!
![]() |
||
![]() |
||
![]() |
||
![]() |
||