Abesco Fire Rated Foam-FireRated Foam- Fire Rated Expanding Foam- Abesco Fire Rated Expanding Foam- Firestop Distributor- FireStop Protection
ABESCO FIREFOAM RATINGS:
The FP200 Fire Rated Expanding Foam provides an insulating seal to concrete, brick, wood, metal, aluminum and steel. Abesco Fire Rated Foam, Firerated Foam, Fire Rated Expanding Foam, Abesco Fire Rated Expanding Foam, Firestop Distributor, FireStop Protection.The FP 200 expands to approximately 1 cubic foot per can- depending on temperature and humidity.Provides an insulating seal to concrete, brick, wood, metal, aluminum & steel .Environment friendly and 100% CFC Free
Abesco FP200 Fire Rated Expanding Foam is a fire rated polyurethane expanding foam designed to prevent the spread of fire and smoke from one compartment to another through gaps and voids of fire rated walls or floors. The FP200 Fire Rated Expanding Foam provides an insulating seal to concrete, brick, wood, metal, aluminum and steel.FP200 FR Expanding Foam properly fills gaps and voids in through penetration firestop systems. Under fire conditions the Abesco FP200 FR Expanding foam provides an effective insulating barrier and maintains the integrity of the firewall or floor. Compliments the Abesco CT120 Cable Transit system. HOW DOES IT WORK?
Abesco Firestop in 24 ounce cans expands to about 1 cubic foot- depending on temperature and humidity
$25.50 /per can Single Unit Price Case Price $23.45 per can-plus shipping
WHERE DO I USE FP200 FR EXPANDING FOAM? Abesco FP200 FR Expanding Foam is suitable for use in most buildings where a seal is required for through penetrations in fire rated floors and walls (for Installation details please refer to technical data sheet) Typical types of buildings FP200 FR Expanding Foam is commonly used are: Single and two family homes, hotels, condominiums, office and commercial buildings, hospitals, etc WHAT HAPPENS IN A FIRE SITUATION? Under fire conditions Abesco FP200 FR Expanding Foam provides an effective insulating barrier, thereby maintaining the integrity of the wall or floor and preventing the spread of fire from one compartment to another.
|
![]() |
Telecomm cables found in a Hospital, the day before a Joint Commission Inspection. Cables were sleeved without having to be removed with our Split Sleeve & Bulkhead System. | ![]() |
Active fire suppression includes mechanical systems such as sprinklers, that are designed to extinguish fires after they have started. Passive fire protection functions to contain fires within the areas in which they start, preventing loss of life by preventing the products of combustion (smoke, hot gasses and flames) from spreading throughout a building.
Fire is a dangerous enough phenomenon that redundancy in fire protection is necessary. Having passive protection in place helps assure building occupants that there will be time to exit before gasses, fire and smoke spread throughout the building. If active systems fail, as they often do, then there is still a passive system in place for life safety.
It is the use of many products designed for specific firestop applications that comprise a complete passive firestop fire protection systems. When installed properly, these firestop products work in concert with one another to create effective barriers against the passage of flames, smoke, and superheated gases. Used is conjunction with other firestop fire protection methods, properly installed passive fire protection will save lives, protect property, and minimize business losses.
Joints
Construction joints must be sealed with joint systems, which will impart a fire resistance at least equal to those of the adjacent constructions so that overall fire resistance is not compromised.
Additional Information -Applications Click
Fire resistive joint systems are used in building construction to seal joints, and must be of the same or greater fire resistance (temperature) rating as the wall or floor containing the opening which they are designed to protect. Perimeter joint systems are most often used to seal a clearance separation between curtain walls and floors. They are designed to accommodate various movements induced
From the leader in fire protection...
Our manufacturer partners have been creating innovative firestop systems for more than 25 years. Our complete line of fire protection products helps stop the spread of fire, smoke and toxic fumes. They’re easy to install and are approved for a wide variety of firestop applications including but not all: Underwriter’s Laboratories, Factory Mutual and Omega Point Laboratories. American Tele Data as a distributor can provide fully tested systems to firestop all of these scenarios:
Please Visit Our Product Links Below:
Firestop Products Data Sheets -Click
Abesco CT120 Cable Transits are designed to prevent the spread of fire from one compartment to another where electrical, data, and communication cables penetrate through separating walls and floors.
Abesco CT120 Cable Transits consist of a square section steel sleeve, which contains the heat reactive intumescent material. The unit has an integral hinged top which provides an easy retro-fit option where cables are pre-installed. Abesco CT Mounting Plates provide a quick and easy method of installing single or multiple CT120 Cable Transits. even in drywall partitions.
WHY USE ABESCO CT120 CABLE TRANSITS ?
Abesco CT120 Cable Transits are suitable for use in any building where electrical, data, or communication cables penetrate through fire rated compartment floors and walls, including drywall.
Typical types of buildings where Abesco CT120 Cable Transits are commonly used are :
Banking and finance buildings, data processing centers, TV and media studios, apartment buildings, hotels, office buildings, hospitals, airports, retail centers etc.
WHAT HAPPENS IN A FIRE SITUATION?
When exposed to the heat of a fire, the graphite based intumescent material contained in the Abesco CT120 Cable Transits expands rapidly to close and seal the inside of the sleeve, preventing the spread of fire from one compartment to another.
Additional Firestop Links Below:
Alliance for Fire and Smoke Containment and Control (AFSCC)
The American Tele Data Institute of Architects (AIA)
American Tele Data National Standards Institute (ANSI)
American Tele Data Society for Testing and Materials (ASTM)
Building Officials and Code Administrators International (BOCA)
Canadian Fire Safety Association (CFSA)
Factory Mutual Research Corp (FMRC)
Abesco supply a wide range of Firestop products which provide the specifier, engineer and contractor with cost effective solutions to most passive fire protection problems experienced on todays construction projects.
We will beat any US-Based Company's Price On Firestop - CableTray or Raceway!
Raceway System Solutions- Cable Tray Systems-Cable tray-Cable trays-Cable Tray Systems-Raceway Systems- Flextray-Basket Tray
Snake Tray Cabletray-Raceway Systems
Snake Loop
![]() |
||
![]() |
||
![]() |
||
![]() |
||
![]() |
||
Home | Cables | Switches | Contact Us | Our Team | Locations
- 2010 All Rights Reserved -
|