(Part Number – ZIP-50KITB6) Polywater® ZipSeal™ Foam Sealant System – 6 – ZIP-50KIT1 (6 per case) – Lubricant – Gel – Polywater
Download Spec Sheet
6 – ZIP-50KIT1 (6 per case)
Call for Price
Fast and efficient way to seal small conduits and communication innerducts.
Polywater® ZipSeal™ Duct Sealant is a two-part, closed-cell, high-expansion foam duct sealing system that is quick to install and easy to remove. The innovative Zip-Disc™ damming system of this product makes it easy to seal 1¼-inch (32mm) ducts and up to 2-inch (50mm) ducts, both horizontally and vertically. Additionally, just one kit of Polywater ZipSeal is capable of sealing up to five 2-inch (50mm) ducts and is compatible to use with a variety of conduit and cable jacket materials.
Overview
PROTECTS
Keeps water, gases, and rodents out of conduits
QUICK
Installs in just 45 seconds
RE-ENTERABLE
Once installed, can be quickly removed and resealed if necessary
MULTIPLE SEALS
One kit seals up to five 2-inch (50 mm) conduits
COMPATIBLE
Safe to use with cable jacket and conduit materials
COMPLIANT
Meets most performance standards and recommended installation practices
Related products
-
InnerDuct, InnerDuct Accessories, Pull Tape
Bull-Line Polyester Pull Tape WP05 10000ft
*Please note there may be minimums requirements for all types of innerduct
Bull-Line 100% Polyester Pull Tape provides a competitive solution for applications that require a high tensile strength and low elongation. Bull-Line Pull Tape is lightweight and has good blowability. Bull-Line Pull Tape has low burn through resistance in comparison to other brands. An added benefit of all Bull-Line Pull Tapes are the durable print and sequential markings, in both feet or meters, for accurate locating during installation. Bull-Line Pull Tape is made in the USA.SKU: 20000043 -
Conduit, DuraLine, InnerDuct, NEMA TC7, Standard HDPE
NEMA TC7 Standard HDPE – 1 1/4” EPEC 11 – Dura-Line Conduit/InnerDuct
Conduit, DuraLine, InnerDuct, NEMA TC7, Standard HDPENEMA TC7 Standard HDPE – 1 1/4” EPEC 11 – Dura-Line Conduit/InnerDuct
*Please note there may be minimums requirements for all types of innerduct
Our HDPE conduit made in accordance with requirements of NEMA TC-7 and is ideal for the installation and protection of electrical cables underground.SKU: DL-SHDPE-NEMATC7-1-1/4-EPEC-11 -
Couplers, InnerDuct, InnerDuct Accessories
2.00″ Shur-Lock II Coupler SDR 2.375″ – Dura-Line
*Please note there may be minimums requirements for all types of innerduct
Shur-Lock II is a plastic coupler designed for coupling HDPE & PVC conduit. Can also be used to couple dissimilar conduits such as HDPE to PVC, threaded or non-threaded metal conduit, or fiberglass (FRP) conduit. The coupler features stainless steel band clamps (hand tightened using a 5/16″ nut driver) and locking ring. A pre-lubricated O-ring forms an air-tight seal to withstand 125 PSI on 1″ – 3″ sizes. Also a specialized coupler for use by electrical installers requiring ETL/UL listing.SKU: 20000123 -
Couplers, InnerDuct, InnerDuct Accessories
0.75″ Clear-Lock Coupler – Dura-Line
*Please note there may be minimums requirements for all types of innerduct
Experience the same fast and easy installation of our Push-Lock couplers now with a new, clear body design. Simply push the duct ends into the coupler for a locked and air-sealed assembly. Slightly shorter than the original Push-Lock, the Clear-Lock is ideal for pull boxes, vaults or other limited access areas. The non-metallic construction provides excellent corrosion resistance in buried or encased applications and also has desirable dielectric properties.SKU: 20005661 -
Couplers, InnerDuct, InnerDuct Accessories
2.00″ Shur-Lock II Coupler-Extended SDR 2.375″ (8.25″ long vs 5.75″ standard) – Dura-Line
Couplers, InnerDuct, InnerDuct Accessories2.00″ Shur-Lock II Coupler-Extended SDR 2.375″ (8.25″ long vs 5.75″ standard) – Dura-Line
*Please note there may be minimums requirements for all types of innerduct
Shur-Lock II is a plastic coupler designed for coupling HDPE & PVC conduit. Can also be used to couple dissimilar conduits such as HDPE to PVC, threaded or non-threaded metal conduit, or fiberglass (FRP) conduit. The coupler features stainless steel band clamps (hand tightened using a 5/16″ nut driver) and locking ring. A pre-lubricated O-ring forms an air-tight seal to withstand 125 PSI on 1″ – 3″ sizes. Also a specialized coupler for use by electrical installers requiring ETL/UL listing.SKU: 20000264
