(Part Number – UPR-PRKIT3) Polywater® UPR™ Wood Utility Pole Repair – 3 – 250-ml UPR™ Pole Repair cartridges 4 mixing nozzles 5 green-treated wood blocks 1 roll of stretch wrap 1 pair of gloves Instructions – Lubricant – Repair – Polywater
Download Spec Sheet
3 – 250-ml UPR™ Pole Repair cartridges
4 mixing nozzles
5 green-treated wood blocks
1 roll of stretch wrap
1 pair of gloves
Instructions
Call for Price
Restore the integrity of damaged wood utility poles to maximize their life expectancy with woodpecker hold filler.
Polywater UPR-PR and UPR-NF (no flow) woodpecker hole repair kits make it easy to repair woodpecker damage, cracks, and pole line hardware holes on wood utility poles and cross arms, including sealing the pole top barrier. The resin and hardener of Polywater’s utility pole foam are specially formulated to expand and fill irregular-shaped cavities protecting poles from rot and returning them to a secure condition. UPR-NF woodpecker hole filler is formulated to thicken immediately and increase in viscosity as it expands, which decreases leaking out of cracks and crevices while speeding up application.
Overview
EXPANDS
Utility pole foam completely fills irregular-shaped cavities—expands above primary hole and needs no pilot hole
ADHERES
Integrates with wood and expands in between fibers
HARDENS
Cures to the strength of wood poles
GAFFABLE
Safely holds climbing spikes or gaffs
QUICK MIXING
Two-part formula mixes in nozzle when applied during installation
EFFICIENT
Deploy with a standard, high ratio caulking gun—no special tool required
Related products
-
Conduit, DuraLine, InnerDuct, NEMA TC7, Standard HDPE
NEMA TC7 Standard HDPE – 1” EPEC 11 – Dura-Line Conduit/InnerDuct
Conduit, DuraLine, InnerDuct, NEMA TC7, Standard HDPENEMA TC7 Standard HDPE – 1” EPEC 11 – Dura-Line Conduit/InnerDuct
*Please note there may be minimums requirements for all types of innerduct
Our HDPE conduit made in accordance with requirements of NEMA TC-7 and is ideal for the installation and protection of electrical cables underground.SKU: DL-SHDPE-NEMATC7-1-EPEC-11 -
Conduit, DuraLine, InnerDuct, NEMA TC7, Standard HDPE
NEMA TC7 Standard HDPE – 1 1/4” EPEC 11 – Dura-Line Conduit/InnerDuct
Conduit, DuraLine, InnerDuct, NEMA TC7, Standard HDPENEMA TC7 Standard HDPE – 1 1/4” EPEC 11 – Dura-Line Conduit/InnerDuct
*Please note there may be minimums requirements for all types of innerduct
Our HDPE conduit made in accordance with requirements of NEMA TC-7 and is ideal for the installation and protection of electrical cables underground.SKU: DL-SHDPE-NEMATC7-1-1/4-EPEC-11 -
InnerDuct, InnerDuct Accessories, Pull Tape
Bull-Line Polyester Pull Tape WP05 5000ft
*Please note there may be minimums requirements for all types of innerduct
Bull-Line 100% Polyester Pull Tape provides a competitive solution for applications that require a high tensile strength and low elongation. Bull-Line Pull Tape is lightweight and has good blowability. Bull-Line Pull Tape has low burn through resistance in comparison to other brands. An added benefit of all Bull-Line Pull Tapes are the durable print and sequential markings, in both feet or meters, for accurate locating during installation. Bull-Line Pull Tape is made in the USA.SKU: 20000045 -
Couplers, InnerDuct, InnerDuct Accessories
0.75″ Clear-Lock Coupler – Dura-Line
*Please note there may be minimums requirements for all types of innerduct
Experience the same fast and easy installation of our Push-Lock couplers now with a new, clear body design. Simply push the duct ends into the coupler for a locked and air-sealed assembly. Slightly shorter than the original Push-Lock, the Clear-Lock is ideal for pull boxes, vaults or other limited access areas. The non-metallic construction provides excellent corrosion resistance in buried or encased applications and also has desirable dielectric properties.SKU: 20005661 -
Couplers, InnerDuct, InnerDuct Accessories
4.00″ Shur-Lock II Coupler SDR 4.500″ – Dura-Line
*Please note there may be minimums requirements for all types of innerduct
Shur-Lock II is a plastic coupler designed for coupling HDPE & PVC conduit. Can also be used to couple dissimilar conduits such as HDPE to PVC, threaded or non-threaded metal conduit, or fiberglass (FRP) conduit. The coupler features stainless steel band clamps (hand tightened using a 5/16″ nut driver) and locking ring. A pre-lubricated O-ring forms an air-tight seal to withstand 125 PSI on 1″ – 3″ sizes. Also a specialized coupler for use by electrical installers requiring ETL/UL listing.SKU: 20000245
