(Part Number – RHH500YYYXXMUL) Renewables™ by Remee Designed for Solar & Wind Power Networks – RHH, RHW-2, USE-2, 600V – 500, 61 Str BC or TC, NS, XLPE ins – UL 44, UL 854 – Solar & Wind Cables

Renewables™ by Remee for Solar & Wind Energy

Remee provides the following cables for new installation or maintenance in Solar and Wind farms:

• Solar Array Cables – Copper: PV (Photovoltaic) wire rated 1kV/2kV with stranded BC or TC, and 600V with stranded BC; all PV cables have XLPE (cross-linked polyethylene) insulation. Most popular sizes are shown in the Part Number Table below, other sizes available on request.

• Collection Cables (DC Feeder PV) – Aluminum: PV (Photovoltaic) wire rated 1kV/2kV with compact stranded bare aluminum (AA-8000 Series Aluminum Alloy); all PV cables have XLPE (cross-linked polyethylene) insulation. Also used for connecting solar arrays. Most popular sizes are shown in the Part Number Table below, other sizes available on request.

• Power Equipment / Wind Tower Cables: Type RHH / RHW-2 / USE-2 copper cables rated for use at 600V and suitable for wet locations, including direct burial. Also, 4-conductor cables with stranded BC, rated 1000V, with XLPE insulation and PVC jacket for WTTC applications.The most popular sizes of both cable types are shown in the Part Number Table below; other configurations and sizes are available on request.

• MV Primary Distribution Cables – Copper & Aluminum: Both MV Series are rated 35kv; they feature tree-retardant cross-linked polyethylene (TR-XLPE) insulation and a cross-linked polyethylene (XLPE) jacket. The cable is designed for use in three-phase systems with voltage not exceeding 35,000 volts phase to phase. Suitable for direct burial.A “DISCHARGE-FREE” design concept underpins the manufacture of this cable. Conductor shield, insulation, and insulation shield are extruded simultaneously over the conductor by using triple extrusion and dry-curing technology. The insulation shield is designed to be strippable. Double-helix compatible water-blocking yarn is used on all conductors. Water-swellable tape is applied over the insulation shield.

• Substation Cable: Remee provides a comprehensive selection of standard control cables, shielded and unshielded, as well as custom cable manufacturing capabilities to provide the data and power handling needed for specific substation applications. Armoring options are also available.

• Fiber Optic Cable: Interference-free Fiber Optic cables are available with loose tube construction featuring Remee’s gel-free AquaLock™ design; available with and without armor. Fiber optic cables in duct are available upon request. Also see Remee’s complete selection of Fiber Optic Cables.

• Ground Wire: BC and TC solid and stranded conductors are available in a variety of configurations and sizes.

Renewables™ by Remee Brochure

Download the Renewables™ by Remee PDF Brochure

Standards & Certifications

Remee PV wire meets the following standards. Refer to spec sheets for standards applicable to each cable.

• UL 4703
• UL 44
• UL 854
• UL 1581
• CSA C.22 .2 No. 271
• NFPA 70

The MV cables will comply with all applicable requirements of the following standards:

• ICEA S-94-649 – Standard for Concentric Neutral Cables Rated 5-46 kV
• AEIC CS8 – Specification for Extruded Dielectric, Shielded Power Cables Rated 5-46 kV
• UL1072 – MV90 and MV105 – Standard for Medium-Voltage Power Cables
• CSA 68.10 – Shielded Power Cable for Commercial and Industrial Applications, 5-46 kV

All Remee cable products are manufactured under ISO 9001 certification. MV cable compounds are handled and loaded in a Class 10000 clean room. An optical pellet analyzer is used by the supplier to perform 100% pellet inspection.

Standard Cables & Other Available Renewables™ by Remee

Choose from the standard cable options in the Part Number Table below. Check with Remee for availability. Part numbers link to their respective cable spec sheet.

Important Remee Features

• Flexibility – Cables with stranded conductors provide greater flexibility and ease when installing in walls or ceilings
• Water-Blocking – Water-swellable tape, water-blocking compounds or AquaLock™ dry tube technology are options at Remee to create a moisture barrier for direct burial or other applications where the cable is exposed to water or moisture
• Parallelling – Two single conductor PV wires spooled on one reel
• Jacket Options – Remee offers EPR and XLPE as jacketing options for MV cables

Uses