(Part Number – PF-2) Polywater® PedFloor™ Pest and Moisture Blocking Foam Pedestal Sealant – Kit for 2-square foot (approx.) with a 3-inch depth (1860-cm2 at 7.5-cm depth) 1 burst pack 1 pair of gloves 1 roll of duct tape 1 plastic sheet Instruction sheet – Lubricant – Sealant – Polywater
Download Spec Sheet
Kit for 2-square foot (approx.) with a 3-inch depth (1860-cm2 at 7.5-cm depth)
1 burst pack
1 pair of gloves
1 roll of duct tape
1 plastic sheet
Instruction sheet
Call for Price
Pest and moisture foam safeguards enclosures and equipment to prevent costly unplanned outages or service disruptions.
Polywater® PedFloor™ pest and water foam sealant creates a hard foam ground barrier that improves service reliability and safety by keeping out moisture and blocking pests from burrowing into enclosures. Polywater PedFloor thoroughly adheres to various pad and conduit materials to make a permanent cabinet floor seal, yet can be re-entered if you need to install new ducts.
Overview
PREVENTS
Keeps mice, rats, snakes, insects, and water from entering the pedestal or cabinet
PROTECTS
Cured product offers permanent protection through weather extremes
EASY TO USE
Ready to mix and apply. No water needed nor PPE required
THOROUGH SEAL
Flows and self-levels before expansion to seal the entire opening, including complex shapes
RE-ENTERABLE
Saw or drill after installation to install new ducts or cables
DURABLE
The strong, lightweight seal withstands freeze-thaw cycles and environmental extremes
Related products
-
Couplers, InnerDuct, InnerDuct Accessories
1.00″ Shur-Lock II Coupler SDR 1.315 – Dura-Line
*Please note there may be minimums requirements for all types of innerduct
Shur-Lock II is a plastic coupler designed for coupling HDPE & PVC conduit. Can also be used to couple dissimilar conduits such as HDPE to PVC, threaded or non-threaded metal conduit, or fiberglass (FRP) conduit. The coupler features stainless steel band clamps (hand tightened using a 5/16″ nut driver) and locking ring. A pre-lubricated O-ring forms an air-tight seal to withstand 125 PSI on 1″ – 3″ sizes. Also a specialized coupler for use by electrical installers requiring ETL/UL listing.SKU: 20000118 -
InnerDuct, InnerDuct Accessories, Pull Tape
Bull-Line Aramid Woven Pull Tape WK18 5000ft
*Please note there may be minimums requirements for all types of innerduct
Bull-Line Aramid Pull Tape offers the highest tensile strength per widths along with low elongation. These tapes are also sequentially marked in feet or meters for accurate installation measurements. Bull-Line Aramid Pull Tape is made in the USA.SKU: 20002173 -
Conduit, DuraLine, InnerDuct, NEMA TC7, Standard HDPE
NEMA TC7 Standard HDPE – 1” EPEC 40 – Dura-Line Conduit/InnerDuct
Conduit, DuraLine, InnerDuct, NEMA TC7, Standard HDPENEMA TC7 Standard HDPE – 1” EPEC 40 – Dura-Line Conduit/InnerDuct
*Please note there may be minimums requirements for all types of innerduct
Our HDPE conduit made in accordance with requirements of NEMA TC-7 and is ideal for the installation and protection of electrical cables underground.SKU: DL-SHDPE-NEMATC7-1-EPEC-40 -
InnerDuct, InnerDuct Accessories, Pull Tape
Bull-Line Polyester Pull Tape WP05 3000ft
*Please note there may be minimums requirements for all types of innerduct
Bull-Line 100% Polyester Pull Tape provides a competitive solution for applications that require a high tensile strength and low elongation. Bull-Line Pull Tape is lightweight and has good blowability. Bull-Line Pull Tape has low burn through resistance in comparison to other brands. An added benefit of all Bull-Line Pull Tapes are the durable print and sequential markings, in both feet or meters, for accurate locating during installation. Bull-Line Pull Tape is made in the USA.SKU: 20000044 -
Couplers, InnerDuct, InnerDuct Accessories
0.75″ Clear-Lock Coupler – Dura-Line
*Please note there may be minimums requirements for all types of innerduct
Experience the same fast and easy installation of our Push-Lock couplers now with a new, clear body design. Simply push the duct ends into the coupler for a locked and air-sealed assembly. Slightly shorter than the original Push-Lock, the Clear-Lock is ideal for pull boxes, vaults or other limited access areas. The non-metallic construction provides excellent corrosion resistance in buried or encased applications and also has desirable dielectric properties.SKU: 20005661
