Availability:
129 in stock
$57.00
129 in stock
Cabinet Baying Kit
Features
- Allows two cabinets to be mounted at six (6) points along the vertical frame side.
- Comes with four (6) screws, washers and hex nuts.
- Increases cabinet stability.
- For use with the C2 cabinet series only.
- The side panel must be removed to install the joining kit.
Related products
-
Hammond, Archive, Rack Accessories, Rack Mounting Solutions
10-32 Square Hole Cage Nuts 1421CNA Series – (CAGKIT1032-25)
Hammond, Archive, Rack Accessories, Rack Mounting Solutions10-32 Square Hole Cage Nuts 1421CNA Series – (CAGKIT1032-25)
Features
- 10-32 cage nuts for 0.375″/9.54mm square hole punched panel rails.
- Has the holding strength of a 10-32 nut.
- Heat-treated by means of austempering.
- Zinc plated.
Specifications
- Constructed of SAE 1050-1065 spring steel.
- Recommended torque spec 31.4 +/- 20% inch-lbs
- Maximum load rating will vary depending on rail mounting and cabinet load rating.
SKU: CAGKIT1032-25 -
Hammond, Mounting Hardware, Rack Accessories, Rack Mounting Solutions
Mounting Screw and Cup Washer Combo-Pack 1421 Series – (1421A25)
Hammond, Mounting Hardware, Rack Accessories, Rack Mounting SolutionsMounting Screw and Cup Washer Combo-Pack 1421 Series – (1421A25)
The 1421 screw provides a standard 0.625” rack screws length with 10-32 threads. The screw itself features a slotted oval head and has a nickel plate finish.
SKU: 1421A25 -
Hammond, Mounting Hardware, Rack Accessories, Rack Mounting Solutions
Mounting Screw and Cup Washer Combo-Pack 1421 Series – (1421100)
Hammond, Mounting Hardware, Rack Accessories, Rack Mounting SolutionsMounting Screw and Cup Washer Combo-Pack 1421 Series – (1421100)
The 1421 screw provides a standard 0.625” rack screws length with 10-32 threads. The screw itself features a slotted oval head and has a nickel plate finish.
SKU: 1421100 -
Hammond, Archive, Rack Accessories, Rack Mounting Solutions
10-32 Square Hole Cage Nuts 1421CNA Series – (CAGKIT1032-100)
Hammond, Archive, Rack Accessories, Rack Mounting Solutions10-32 Square Hole Cage Nuts 1421CNA Series – (CAGKIT1032-100)
Features
- 10-32 cage nuts for 0.375″/9.54mm square hole punched panel rails.
- Has the holding strength of a 10-32 nut.
- Heat-treated by means of austempering.
- Zinc plated.
Specifications
- Constructed of SAE 1050-1065 spring steel.
- Recommended torque spec 31.4 +/- 20% inch-lbs
- Maximum load rating will vary depending on rail mounting and cabinet load rating.
SKU: CAGKIT1032-100
