Welcome to American Tele Data

USA MADE - BABA COMPLIANT

AMERICAN TELEDATA

“744-386-20 Environment Control (744-386-20) – Multilink” has been added to your cart. View cart

Power Transfer Device for Traffic UPS

(Part Number: 010-502-10) – Power Transfer Device for Traffic UPS, 120v, Screw Terminal Block – Uninterruptible Power Supplies – ITS/Traffic Accessories

Call for Price

Manual bypass switch (panel transfer device) that is compatible with the EP2200-T. Allows for maintenance to be done on UPS and batteries without loss of power to the load.

(SKU: 103-191021001) – MicroFlow drive wheel A 2.0 mm incl – o-ring – Microfiber Blowers for Microduct Cable Installation – Microfiber Blowers – Microduct Fiber Cable Blowers – FTTH – FTTH Blowers – Fiber to the Home – Fiber to the Home Blowers – Fremco

$354.90

(SKU: 103-191021002) – MicroFlow drive wheel B 2.5 mm incl – o-ring – Microfiber Blowers for Microduct Cable Installation – Microfiber Blowers – Microduct Fiber Cable Blowers – FTTH – FTTH Blowers – Fiber to the Home – Fiber to the Home Blowers – Fremco

$354.90

(SKU: 103-191021003) – MicroFlow drive wheel C 3.0 mm incl – o-ring – Microfiber Blowers for Microduct Cable Installation – Microfiber Blowers – Microduct Fiber Cable Blowers – FTTH – FTTH Blowers – Fiber to the Home – Fiber to the Home Blowers – Fremco

$354.90

(SKU: 103-191021004) – MicroFlow drive wheel D 6.0 mm incl – o-ring – Microfiber Blowers for Microduct Cable Installation – Microfiber Blowers – Microduct Fiber Cable Blowers – FTTH – FTTH Blowers – Fiber to the Home – Fiber to the Home Blowers – Fremco

$354.90

(SKU: 103-171114001) – MicroFlow sensor arm set 1.5 mm – Microfiber Blowers for Microduct Cable Installation – Microfiber Blowers – Microduct Fiber Cable Blowers – FTTH – FTTH Blowers – Fiber to the Home – Fiber to the Home Blowers – Fremco

$321.10

(SKU: 103-171114002) – MicroFlow sensor arm set 2.0 mm – Microfiber Blowers for Microduct Cable Installation – Microfiber Blowers – Microduct Fiber Cable Blowers – FTTH – FTTH Blowers – Fiber to the Home – Fiber to the Home Blowers – Fremco

$321.10

Description
Brand

Description

SPECS

General Specifications
Input Connection	Terminal Block
Output Connection	1″> 6 foot line cords ready for hard wiring to UPS terminal block Terminal Block
PTS Transfer Time	1″> < 65 ms Buck & Boost mode < 10ms
Frequency	60Hz ±3Hz

Input Specifications
Step Load Response	1/2 Cycle Full Recovery (Full resistive load)
Short Circuit Protection	15A Circuit Breaker
Battery String Voltage	48VDC (Four 12VDC Battery)
Voltage Range	100~130VAC (120VAC Nominal) Prog. 90-150VAC
Current Capacity	30A

Physical Specifications
Width	1″> 4.75″ 120.6mm
Height	1″> 4.6″ 116.8mm
Depth	1″> 6.5″ 165mm
Weight	7 lbs

Output Specifications
Load Crest Factor	3:1 (Max)
Power VA/W	2000VA/1500W
Output Voltage	100~130 +/- 2VAC
Overload Capacity	110% for 3 minutes
Output Waveform	Sine Wave
Inverter Mode	120VAC +/- 5%
Output Waveform THD	< 3% (Resistive Load)
Power Factor	0.75

Mechanical Specifications
Mounting	Rack Mount EARS, 4 points optional 19″ rack mount

Environmental Specifications
Storage Temperature Range	-50°C to 75°C
Altitude (Note 2)	10,000ft/3,000m
Cooling	Convection (Approx. 7 with contractor coil dissipation)
Operating Temperature	-34°C to +74°C
Operating Humidity Level	0-95% Non Condensing

Safety Standard Specifications
Surge Immunity	IEC 1000-4-5
EMI	FCC Class A

Brand

Multilink

You were not leaving your cart just like that, right?

You were not leaving your cart just like that, right?

Enter your details below to save your shopping cart for later. And, who knows, maybe we will even send you a sweet discount code :)