BlownIn

BlownIn CT, as all air blown fiber optic cables, is rigid yet flexible enough to be installed into microducts. This micro fiber optic cable consists of a PBT central loose tube with optical fibers (can have up to 24 fibers) and water-blocking gel. Aramid yarns as strength elements are laid over the loose tube.
It is an all-dielectric design suitable for indoor and outdoor cable conduits and trays. This design also features reduced weight (reaching up to 0.007 lb/ft) and size (with cable diameter reaching up to 0.134 in). Operation tension can be up to 18 lb (0.08 kN) and installation tension can reach up to 34 lb (0.15 kN). It also has a wide range of operating temperatures from -4°F to +158°F and installation temperatures from -4°F to +122°F.
This air-blown microduct fiber optic cable is optimized for use in FTTH networks. Blowing technology is a cost-effective, fast, and environmentally friendly solution than traditional type of deployments and it also provides a simpler installation using fewer resources.

BlownIn CT, as all air blown fiber optic cables, is rigid yet flexible enough to be installed into microducts. This micro fiber optic cable consists of a PBT central loose tube with optical fibers (can have up to 24 fibers) and water-blocking gel. Aramid yarns as strength elements are laid over the loose tube.
It is an all-dielectric design suitable for indoor and outdoor cable conduits and trays. This design also features reduced weight (reaching up to 0.007 lb/ft) and size (with cable diameter reaching up to 0.134 in). Operation tension can be up to 18 lb (0.08 kN) and installation tension can reach up to 34 lb (0.15 kN). It also has a wide range of operating temperatures from -4°F to +158°F and installation temperatures from -4°F to +122°F.
This air-blown microduct fiber optic cable is optimized for use in FTTH networks. Blowing technology is a cost-effective, fast, and environmentally friendly solution than traditional type of deployments and it also provides a simpler installation using fewer resources.

BlownIn is a multitube design that can have up to 432 fibers. It is an all-dielectric and UV-resistant micro air blown cable suitable for indoor and outdoor cable conduits and trays. These cables typically consist of a stranded core with central strength element (FRP), gel-filled loose tubes with optical fibers and PBT fillers (where applicable). The stranded core is fixed by water-swellable yarns. Operation tension can reach up to 225 lb (1 kN) and installation tension can be up to 674 lb (3 kN). It also has a wide range of operating temperatures from -40°F to +158°F and installation temperatures from -22°F to +122°F.
BlownIn cables can be manufactured in several options:
Option PE 250

250 μm fiber
HDPE outer jacket

Option PA 250

250 μm fiber
PA outer jacket

Option PA 200

200 μm fiber
PA outer jacket

Option PA 200 Reduced

200 μm fiber
PA outer jacket
Decreased design (up to 48 optical fibers)

 
Different designs comparison:

250 μm fiber and HDPE outer jacket: 5.6 – 11.2 mm
250 μm fiber and PA outer jacket: 5.1 – 10.7 mm
200 μm fiber and PA outer jacket: 4.5 – 9.3 mm
200 μm fiber and PA outer jacket (decreased design (up to 48 OF)): 3.6 mm

 
250 μm fiber:

Price — lower
Standard diameter of 12 OF loose tube, mm — 1.4
Application — simple tasks, when there is no strict diameter limit

200 μm fiber:

Price — higher
Standard diameter of 12 OF loose tube, mm — 1.2
Application — strict diameter limit, cable with 250 μm OF doesn’t fit

BlownIn is a multitube design that can have up to 432 fibers. It is an all-dielectric and UV-resistant micro air blown cable suitable for indoor and outdoor cable conduits and trays. These cables typically consist of a stranded core with central strength element (FRP), gel-filled loose tubes with optical fibers and PBT fillers (where applicable). The stranded core is fixed by water-swellable yarns. Operation tension can reach up to 225 lb (1 kN) and installation tension can be up to 674 lb (3 kN). It also has a wide range of operating temperatures from -40°F to +158°F and installation temperatures from -22°F to +122°F.
BlownIn cables can be manufactured in several options:
Option PE 250

250 μm fiber
HDPE outer jacket

Option PA 250

250 μm fiber
PA outer jacket

Option PA 200

200 μm fiber
PA outer jacket

Option PA 200 Reduced

200 μm fiber
PA outer jacket
Decreased design (up to 48 optical fibers)

 
Different designs comparison:

250 μm fiber and HDPE outer jacket: 5.6 – 11.2 mm
250 μm fiber and PA outer jacket: 5.1 – 10.7 mm
200 μm fiber and PA outer jacket: 4.5 – 9.3 mm
200 μm fiber and PA outer jacket (decreased design (up to 48 OF)): 3.6 mm

 
250 μm fiber:

Price — lower
Standard diameter of 12 OF loose tube, mm — 1.4
Application — simple tasks, when there is no strict diameter limit

200 μm fiber:

Price — higher
Standard diameter of 12 OF loose tube, mm — 1.2
Application — strict diameter limit, cable with 250 μm OF doesn’t fit