Welcome to American Tele Data

USA MADE - BABA COMPLIANT

AMERICAN TELEDATA

855 - 848 - Data

855 - 40 - Fiber

[vc_row][vc_column width=”1/3″][vc_column_text]

Figure 8 fiber optic cables are designed for aerial installations, combining strength and durability with efficient fiber performance. These cables feature an integrated steel messenger wire, forming a “figure 8” shape that provides excellent support and easy lashing to poles, making them ideal for outdoor network deployments. Figure 8 fiber optic cables are available in both single-mode and multimode configurations, offering high bandwidth, low attenuation, and superior reliability in harsh environments. Commonly used in telecom, CATV, and broadband applications, figure 8 cables ensure stable, long-distance data transmission. Choose figure 8 fiber optic cables for secure, high-performance aerial fiber installations.

An overhead fiber optic cable with an external strength member is used for cost-effective building aerial communication systems mostly in rural areas, where towers are located close to each other. Unlike all-dielectric self-supporting cables, where the strength member is placed in the core of the design, in Figure 8 cables the strength element is placed outside the core. The cross-section of this cable type is 8-shaped: the upper part is the suspension element, the lower one is the core with the fiber.

Cables with an external strength member are easier to install. Special clamps hold the cable by the external member, so the risk of damaging the loose tubes with fibers inside is relatively low. However, they have certain limitations related to the maximum permissible tensile load.[/vc_column_text][vc_column_text]IncabDuraline[/vc_column_text][vc_column_text]

[/vc_column_text][vc_column_text]

[/vc_column_text][/vc_column][vc_column width=”2/3″][vc_column_text]

InAir Figure 8 CT FRP

InAir Figure 8 CT FRP

is a multi-tube design with a galvanized steel wire as an external strength member

Affordable alternative to InAir ADSS
Low installation cost

[/vc_column_text][vc_column_text]

InAir Figure 8 CT GSW

InAir Figure 8 CT GSW

is a central tube design with a galvanized steel wire as an external strength member

Reduced weight and size
Cost-effective design
Low installation cost

[/vc_column_text][vc_column_text]

InAir Figure 8 GSW

InAir Figure 8 GSW

is a central tube design with a fiberglass rod as an external strength member

All-dielectric design
Reduced weight and size
Cost-effective design

[/vc_column_text][vc_column_text]

Microduct Figure-8

Microduct Figure-8

Small and self-supported with high strength
Available in (OD/ID) from 12.7/10mm and 18/14mm
Internal Ribs, Silicore ULF

[/vc_column_text][vc_column_text]

Innerduct Figure-8

Innerduct Figure-8

Figure-8 construction with EHS
HDPE has carbon black and antioxidants for maximum UV protection
1/4″ or 3/8″ EHS galvanized strand
Utilizes industry standard aerial components
Installation uses the same equipment as standard aerial installation practices

[/vc_column_text][electro_vc_two_row_products shortcode_tag=”product_category” per_page=”5″ columns=”2″ category=”figure-8″][/vc_column][/vc_row][vc_row][vc_column][/vc_column][/vc_row][vc_row][vc_column][/vc_column][/vc_row]

You were not leaving your cart just like that, right?

You were not leaving your cart just like that, right?

Enter your details below to save your shopping cart for later. And, who knows, maybe we will even send you a sweet discount code :)