Lubaduk Summer 5 Gallon Pail – Dura-Line
*Please note there may be minimums requirements for all types of innerduct
LUBADUK® keeps pull tensions low; up to 74% less friction and 50% less pulling tension than with other lubricants. The effectiveness of LUBADUK® has been proven in the field and with extensive testing. Reduced cable tension (as much as 50%) greatly reduces the wear on cable pulling equipment and improves safety. A unique shear-sensitive carrying agent holds a dispersion of silicone oil and microspheres in suspension. LUBADUK® microspheres are tiny ball bearings, with diameters between 0.010” and 0.020.” Pulling cable with LUBADUK® means cable actually rolls on a layer of microspheres, which keep friction between cable and conduit extremely low. Any change in the cable contact point provides a fresh layer of microspheres, keeping friction low.
Call for Price
FEATURES
- Increased pull lengths mean fewer setups
- Fewer pull boxes needed saves costs
- Reduces potential cable damage
- Direct application into the duct before the pull reduces
- Available in standard or winter grade (-40°F)
| Weight | 42 lbs |
|---|
Related products
-
InnerDuct, InnerDuct Accessories, Pull Tape
Bull-Line Polyester Pull Tape WP05 3000ft
*Please note there may be minimums requirements for all types of innerduct
Bull-Line 100% Polyester Pull Tape provides a competitive solution for applications that require a high tensile strength and low elongation. Bull-Line Pull Tape is lightweight and has good blowability. Bull-Line Pull Tape has low burn through resistance in comparison to other brands. An added benefit of all Bull-Line Pull Tapes are the durable print and sequential markings, in both feet or meters, for accurate locating during installation. Bull-Line Pull Tape is made in the USA.SKU: 20000044 -
Couplers, InnerDuct, InnerDuct Accessories
2.00″ Shur-Lock II Coupler-Extended SDR 2.375″ (8.25″ long vs 5.75″ standard) – Dura-Line
Couplers, InnerDuct, InnerDuct Accessories2.00″ Shur-Lock II Coupler-Extended SDR 2.375″ (8.25″ long vs 5.75″ standard) – Dura-Line
*Please note there may be minimums requirements for all types of innerduct
Shur-Lock II is a plastic coupler designed for coupling HDPE & PVC conduit. Can also be used to couple dissimilar conduits such as HDPE to PVC, threaded or non-threaded metal conduit, or fiberglass (FRP) conduit. The coupler features stainless steel band clamps (hand tightened using a 5/16″ nut driver) and locking ring. A pre-lubricated O-ring forms an air-tight seal to withstand 125 PSI on 1″ – 3″ sizes. Also a specialized coupler for use by electrical installers requiring ETL/UL listing.SKU: 20000264 -
Couplers, InnerDuct, InnerDuct Accessories
1.25″ Shur-Lock II Coupler SDR 1.660″ – Dura-Line
*Please note there may be minimums requirements for all types of innerduct
Shur-Lock II is a plastic coupler designed for coupling HDPE & PVC conduit. Can also be used to couple dissimilar conduits such as HDPE to PVC, threaded or non-threaded metal conduit, or fiberglass (FRP) conduit. The coupler features stainless steel band clamps (hand tightened using a 5/16″ nut driver) and locking ring. A pre-lubricated O-ring forms an air-tight seal to withstand 125 PSI on 1″ – 3″ sizes. Also a specialized coupler for use by electrical installers requiring ETL/UL listing.SKU: 20000120 -
Conduit, DuraLine, InnerDuct, NEMA TC7, Standard HDPE
NEMA TC7 Standard HDPE – 1 1/4” EPEC 11 – Dura-Line Conduit/InnerDuct
Conduit, DuraLine, InnerDuct, NEMA TC7, Standard HDPENEMA TC7 Standard HDPE – 1 1/4” EPEC 11 – Dura-Line Conduit/InnerDuct
*Please note there may be minimums requirements for all types of innerduct
Our HDPE conduit made in accordance with requirements of NEMA TC-7 and is ideal for the installation and protection of electrical cables underground.SKU: DL-SHDPE-NEMATC7-1-1/4-EPEC-11 -
Conduit, DuraLine, InnerDuct, NEMA TC7, Standard HDPE
NEMA TC7 Standard HDPE – 1/2” EPEC 13.5 – Dura-Line Conduit/InnerDuct
Conduit, DuraLine, InnerDuct, NEMA TC7, Standard HDPENEMA TC7 Standard HDPE – 1/2” EPEC 13.5 – Dura-Line Conduit/InnerDuct
*Please note there may be minimums requirements for all types of innerduct
Our HDPE conduit made in accordance with requirements of NEMA TC-7 and is ideal for the installation and protection of electrical cables underground.SKU: DL-SHDPE-NEMATC7-1/2-EPEC-13.5
