High Voltage (Plate) (DISCONTINUED) & Filament – 32 VA to 454 VA 200 Series – (270X) (DISCONTINUED)

Features

• Primary 115 VAC, 60 Hz. – except as noted
  • For “universal” primaries and/or 50/60 Hz. operation and other output voltage combinations please see our 300 Series.
• Enclosed, 4 hole, chassis mount.
• Minimum 6″ long leads.
• Units can be run full wave bridge or full wave C.T.
• Class A insulation (105 degrees C).
• Hi-Pot test of 2,000V RMS.
• Conservative designs – CSA certified (209651).
• NOTE: A production “running change” has been made to the primary winding – effective with August 2009 production.

Choice #1 (115 VAC Input):

For those customers who need the 115V input – nothing has changed – simply use the White & Gray wires and tape the Black wire (see above schematic). Note: Gray wire is actually BROWN on only our Part Number 278CX.

Choice #2 (125 VAC Input):

For those customers who are seeing too high a secondary voltage due to higher primary line voltages (roughly 125V input) – use the White & Black wire and tape the gray wire (see schematic).

NOTE: Most of the “Z” mounts do not apply to choices #1 and #2 above. See their respective drawings for available primary voltages.

CAUTION

NEVER connect power to BOTH the GRAY & BLACK wire – instantaneous destruction of the transformer will result!

Gallery