Equipment Cooling, Hammond, Rack Accessories, Rack Mounting Solutions
Filter Fan Kits DNFF Series – (DNFF120CG230)
The DNFF Fan kit is ideal when sealing a cabinet or enclosure. Unlike the DNFK, the DNFF does not include an AC plug as it is designed to be hard-wired with or without a thermostat.
Features
- Kit includes one (1) of the following:
- Fan
- Plastic Filter Grill
- Filter
- Metal Grill
- Wire Cord or Leads (see table)
- Includes Mounting Hardware
- Flame retardant, ABS plastic filter fan grill is moulded in a choice of four colors to match our racks & accessories.
- “BK” (Black)
- “GY” (ANSI 61 Gray)
- “LG” (Light Gray – RAL7035)
- “CG” (Beige) – AVAILABLE WHILE SUPPLIED LAST
- Fan component is UL recognized to UL 507, and cUL recognized or CSA certified to CSA-C22.2 No. 113.
- The filter is designed to meet IP5X dust resistance.
- If required, complementary exhaust filter grill kits (without fan) available – see XPFA Series
$50.40
Filter Fan Kits DNFF Series
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
| Part No. | Part No. | Part No. | Part No. | |||||
|---|---|---|---|---|---|---|---|---|
| Black Filter Grill | ANSI 61 Gray Filter Grill | Gray/Beige Filter Grill | Light Gray Filter Grill | VAC | Fan Size | CFM | Cord Length | Noise (dB) |
| DNFF080BK115 | DNFF080GY115 | DNFF080CG115 | DNFF080LG115 | 115 | 3.15 | 32 | 11 Inch leads | 34 |
| DNFF120BK115 | DNFF120GY115 | DNFF120CG115 | DNFF120LG115 | 115 | 4.70 | 105 | 24 Inch cord | 56 |
| DNFF150BK115 | DNFF150GY115 | DNFF150CG115 | DNFF150LG115 | 115 | 6.00 | 230 | 12 Inch leads | 53 |
| DNFF254BK115 | DNFF254GY115 | DNFF254CG115 | DNFF254LG115 | 115 | 10.00 | 550 | 24 Inch cord | 60 |
| DNFF080BK230 | DNFF080GY230 | DNFF080CG230 | DNFF080LG230 | 230 | 3.15 | 32 | 11 Inch leads | 34 |
| DNFF120BK230 | DNFF120GY230 | DNFF120CG230 | DNFF120LG230 | 230 | 4.70 | 105 | 24 Inch cord | 56 |
| DNFF150BK230 | DNFF150GY230 | DNFF150CG230 | DNFF150LG230 | 230 | 6.00 | 230 | 12 Inch leads | 53 |
| DNFF254BK230 | DNFF254GY230 | DNFF254CG230 | DNFF254LG230 | 230 | 10.00 | 550 | 24 Inch cord | 60 |
CG and 254 sizes are End-of-Life. Available while supplies last.
Replacement Filters (Sold in Pack of 5)
Units shown: inch. Switch units to: mm
| Part No. | Use with Fan Size | Use with XPFA Series | Use with DNFF Series |
|---|---|---|---|
| PFF1000 | 3.15 | XPFA80 | DNFF080 |
| PFF2000 | 4.70 | XPFA120 | DNFF120 |
| PFF4000 | 7.72 | XPFA150 | DNFF150 |
| PFF6000 | 12.00 | XPFA254 | DNFF254 |
Related products
-
Hammond, Mounting Hardware, Rack Accessories, Rack Mounting Solutions
10-32 Rack Rail Clip Nuts 1421N Series – (CLPKIT1032-10)
Hammond, Mounting Hardware, Rack Accessories, Rack Mounting Solutions10-32 Rack Rail Clip Nuts 1421N Series – (CLPKIT1032-10)
Clip Nuts are a great alternative to Cage Nuts and have many more uses. Whether your rack has non-threaded round holes or square, clip nuts are an easier solution to speed up your installation.
Features
- 10-32 clip nuts for non-threaded rack rails.
- Heat-treated by means of austemper.
- Available in black or plated steel finish.
- Ships in clam shell or resealable jar, depending on quantity.
Specifications
- Constructed of SAE 1050-1065 spring steel.
- Recommended torque spec 31.4 +/- 20% inch-lbs
- For use with 0.069-0.079″ panel thickness.
- Hardness: HRC 38-42.
- Maximum load rating will vary depending on rail mounting and cabinet load rating.
- 1421NP are zinc plated CR3.
SKU: CLPKIT1032-10 -
Hammond, Mounting Hardware, Rack Accessories, Rack Mounting Solutions
10-32 Rack Screw 1421D Series – (1421D)
Hammond, Mounting Hardware, Rack Accessories, Rack Mounting Solutions10-32 Rack Screw 1421D Series – (1421D)
Features
- Slotted & phillips combination pan head screws
- Use where economy is important OR for close spacing.
- Example: multiple 1.75″ (1U) panels are mounted next to each other (as cup washers will interfere with each other)
- Zinc plated
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Part No. Qty Included Screw Length 1421D 25 screws 0.50 1421D100 100 screws 0.50 1421D500 500 screws 0.50 SKU: 1421D -
Hammond, Mounting Hardware, Rack Accessories, Rack Mounting Solutions
10-32 Rack Screw 1421D Series – (1421D100)
Hammond, Mounting Hardware, Rack Accessories, Rack Mounting Solutions10-32 Rack Screw 1421D Series – (1421D100)
Features
- Slotted & phillips combination pan head screws
- Use where economy is important OR for close spacing.
- Example: multiple 1.75″ (1U) panels are mounted next to each other (as cup washers will interfere with each other)
- Zinc plated
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Part No. Qty Included Screw Length 1421D 25 screws 0.50 1421D100 100 screws 0.50 1421D500 500 screws 0.50 SKU: 1421D100 -
Hammond, Mounting Hardware, Rack Accessories, Rack Mounting Solutions
10-32 Rack Rail Clip Nuts 1421N Series – (1421N250)
Hammond, Mounting Hardware, Rack Accessories, Rack Mounting Solutions10-32 Rack Rail Clip Nuts 1421N Series – (1421N250)
Clip Nuts are a great alternative to Cage Nuts and have many more uses. Whether your rack has non-threaded round holes or square, clip nuts are an easier solution to speed up your installation.
Features
- 10-32 clip nuts for non-threaded rack rails.
- Heat-treated by means of austemper.
- Available in black or plated steel finish.
- Ships in clam shell or resealable jar, depending on quantity.
Specifications
- Constructed of SAE 1050-1065 spring steel.
- Recommended torque spec 31.4 +/- 20% inch-lbs
- For use with 0.069-0.079″ panel thickness.
- Hardness: HRC 38-42.
- Maximum load rating will vary depending on rail mounting and cabinet load rating.
- 1421NP are zinc plated CR3.
SKU: 1421N250 -
Hammond, Archive, Rack Accessories, Rack Mounting Solutions
10-32 Square Hole Cage Nuts 1421CNA Series – (CAGKIT1032-100)
Hammond, Archive, Rack Accessories, Rack Mounting Solutions10-32 Square Hole Cage Nuts 1421CNA Series – (CAGKIT1032-100)
Features
- 10-32 cage nuts for 0.375″/9.54mm square hole punched panel rails.
- Has the holding strength of a 10-32 nut.
- Heat-treated by means of austempering.
- Zinc plated.
Specifications
- Constructed of SAE 1050-1065 spring steel.
- Recommended torque spec 31.4 +/- 20% inch-lbs
- Maximum load rating will vary depending on rail mounting and cabinet load rating.
SKU: CAGKIT1032-100
