(Part Number – PMT-1) Polywater® InstaGrout™ Utility Enclosure Pad & Rodent Sealant – 1 750-ml Burst Pack 1 pair gloves 1 instruction sheet Kit covers 1-square foot (approx.) at a three-inch depth / 930-cm2 @ 7.6-cm depth – Lubricant – Sealant – Polywater
Download Spec Sheet
1 750-ml Burst Pack
1 pair gloves
1 instruction sheet
Kit covers 1-square foot (approx.) at a three-inch depth / 930-cm2 @ 7.6-cm depth
Call for Price
A thorough and easy moisture and rodent grout product to prevent costly unplanned outages caused by unwanted intrusions from water or animals.
Polywater® InstaGrout™ Sealant is a pourable, two-part urethane foam that seals pad-mounted equipment openings to prevent outages and service disruptions caused by burrowing animals or moisture ingress. It is safer to use and more effective than concrete grout. This moisture and rodent sealant barrier will not collapse during changeouts. Polywater InstaGrout thoroughly adheres to various pad and conduit materials offering a permanent sealant that can be re-entered if you need to install new ducts.
Overview
SECURES ENCLOSURES
Keeps rodents, burrowing animals, snakes, insects, and water from entering enclosures
EASY TO USE
Ready to mix and apply—No water or electricity needed
CUSTOM INSTALLATION
Self-levels and expands to seal the entire opening
RE-ENTERABLE
Saw or drill to install new ducts, conduit stub ups, or cables
PROTECTS
Permanent protection through weather extremes or equipment changeouts
Related products
-
InnerDuct, InnerDuct Accessories, Pull Tape
Bull-Line Aramid Woven Pull Tape WK18 5000ft
*Please note there may be minimums requirements for all types of innerduct
Bull-Line Aramid Pull Tape offers the highest tensile strength per widths along with low elongation. These tapes are also sequentially marked in feet or meters for accurate installation measurements. Bull-Line Aramid Pull Tape is made in the USA.SKU: 20002173 -
InnerDuct, InnerDuct Accessories, Pull Tape
Bull-Line Aramid Woven Pull Tape WK18 3000ft
*Please note there may be minimums requirements for all types of innerduct
Bull-Line Aramid Pull Tape offers the highest tensile strength per widths along with low elongation. These tapes are also sequentially marked in feet or meters for accurate installation measurements. Bull-Line Aramid Pull Tape is made in the USA.SKU: 20000036 -
InnerDuct, InnerDuct Accessories, Pull Tape
Bull-Line Aramid Woven Pull Tape WK18 1000ft
*Please note there may be minimums requirements for all types of innerduct
Bull-Line Aramid Pull Tape offers the highest tensile strength per widths along with low elongation. These tapes are also sequentially marked in feet or meters for accurate installation measurements. Bull-Line Aramid Pull Tape is made in the USA.SKU: 20000132 -
Conduit, DuraLine, InnerDuct, NEMA TC7, Standard HDPE
NEMA TC7 Standard HDPE – 1” EPEC 11 – Dura-Line Conduit/InnerDuct
Conduit, DuraLine, InnerDuct, NEMA TC7, Standard HDPENEMA TC7 Standard HDPE – 1” EPEC 11 – Dura-Line Conduit/InnerDuct
*Please note there may be minimums requirements for all types of innerduct
Our HDPE conduit made in accordance with requirements of NEMA TC-7 and is ideal for the installation and protection of electrical cables underground.SKU: DL-SHDPE-NEMATC7-1-EPEC-11 -
Conduit, DuraLine, InnerDuct, NEMA TC7, Standard HDPE
NEMA TC7 Standard HDPE – 1” EPEC 40 – Dura-Line Conduit/InnerDuct
Conduit, DuraLine, InnerDuct, NEMA TC7, Standard HDPENEMA TC7 Standard HDPE – 1” EPEC 40 – Dura-Line Conduit/InnerDuct
*Please note there may be minimums requirements for all types of innerduct
Our HDPE conduit made in accordance with requirements of NEMA TC-7 and is ideal for the installation and protection of electrical cables underground.SKU: DL-SHDPE-NEMATC7-1-EPEC-40
