(Part Number: NCCCDF000397) – 6″ Simplex Entry Seal for 4″ Innerduct – Outdoor Fiber Connectivity – Innerduct and Conduit – MDG Equipment Co.
$87.00
Link-Seal modular seals are considered to be the premier method for permanently sealing pipes of any size passing through walls, floors and ceilings. In fact, any cylindrical object may be quickly, easily and permanently sealed, as they pass through barriers, by the patented Link-Seal modular seal design.
LS-300-C
Suitable for use in water, direct ground burial and atmospheric conditions. Provides electrical insulation where cathodic protection is required.
Type: Standard
Seal Element:EPDM (Black), EPDM (Blue)
Pressure Plates: Composite
Bolts & Nuts: Steel with 2-part Zinc Dichromate & Proprietary Corrosion Inhibiting Coating
Temp. Range: -40 to +250F. (-40º to +121ºC)*
* = Sustained operation near temperature limits may affect life expectancy.
Cable Diameter Range [in]:
0.157-1.125
Cable Diameter Range [mm]:
4.0-28.6
Height [in]:
10
Length [in]:
10
Width [in]:
10
Item #:
LS-300C
Item Name:
6 Simplex Entry Seal for 4 Innerduct
Nominal Size [in]:
6
Nominal Size [mm]:
152
Package Type:
Each
Shipping Method:
Parcel
Similar to:
471438 JM-SIM-60S450SG
Thickness [in]:
0.69
Thickness [mm]:
17.5
Type of Packages:
275
Unit of Measure:
EA.
Units Per Package:
1
Weight [lb]:
2.500000
Weight [lb]:
2.5
Related products
-
InnerDuct, InnerDuct Accessories, Pull Tape
Bull-Line Aramid Woven Pull Tape WK18 3000ft
*Please note there may be minimums requirements for all types of innerduct
Bull-Line Aramid Pull Tape offers the highest tensile strength per widths along with low elongation. These tapes are also sequentially marked in feet or meters for accurate installation measurements. Bull-Line Aramid Pull Tape is made in the USA.SKU: 20000036 -
Couplers, InnerDuct, InnerDuct Accessories
4.00″ Shur-Lock II Coupler SDR 4.500″ – Dura-Line
*Please note there may be minimums requirements for all types of innerduct
Shur-Lock II is a plastic coupler designed for coupling HDPE & PVC conduit. Can also be used to couple dissimilar conduits such as HDPE to PVC, threaded or non-threaded metal conduit, or fiberglass (FRP) conduit. The coupler features stainless steel band clamps (hand tightened using a 5/16″ nut driver) and locking ring. A pre-lubricated O-ring forms an air-tight seal to withstand 125 PSI on 1″ – 3″ sizes. Also a specialized coupler for use by electrical installers requiring ETL/UL listing.SKU: 20000245 -
InnerDuct, InnerDuct Accessories, Pull Tape
Bull-Line Polyester Pull Tape WP05 5000ft
*Please note there may be minimums requirements for all types of innerduct
Bull-Line 100% Polyester Pull Tape provides a competitive solution for applications that require a high tensile strength and low elongation. Bull-Line Pull Tape is lightweight and has good blowability. Bull-Line Pull Tape has low burn through resistance in comparison to other brands. An added benefit of all Bull-Line Pull Tapes are the durable print and sequential markings, in both feet or meters, for accurate locating during installation. Bull-Line Pull Tape is made in the USA.SKU: 20000045 -
Conduit, DuraLine, InnerDuct, NEMA TC7, Standard HDPE
NEMA TC7 Standard HDPE – 1” EPEC 40 – Dura-Line Conduit/InnerDuct
Conduit, DuraLine, InnerDuct, NEMA TC7, Standard HDPENEMA TC7 Standard HDPE – 1” EPEC 40 – Dura-Line Conduit/InnerDuct
*Please note there may be minimums requirements for all types of innerduct
Our HDPE conduit made in accordance with requirements of NEMA TC-7 and is ideal for the installation and protection of electrical cables underground.SKU: DL-SHDPE-NEMATC7-1-EPEC-40 -
Couplers, InnerDuct, InnerDuct Accessories
1.25″ Shur-Lock II Coupler SDR 1.660″ – Dura-Line
*Please note there may be minimums requirements for all types of innerduct
Shur-Lock II is a plastic coupler designed for coupling HDPE & PVC conduit. Can also be used to couple dissimilar conduits such as HDPE to PVC, threaded or non-threaded metal conduit, or fiberglass (FRP) conduit. The coupler features stainless steel band clamps (hand tightened using a 5/16″ nut driver) and locking ring. A pre-lubricated O-ring forms an air-tight seal to withstand 125 PSI on 1″ – 3″ sizes. Also a specialized coupler for use by electrical installers requiring ETL/UL listing.SKU: 20000120
