(Part Number: NTCPSJ000427) – 1-3/8″ 7000 lb. Hex Clevis Champion Pulling Swivel – Cable Pulling – Swivels – 808 Champion Ball Bearing Swivels – Condux International

Description

Condux Ball Bearing Swivels are designed to the highest specifications for underground and overhead pulling applications. All swivels are tested and inspected to ISO 9001:2000 quality standards. This ensures the customer is getting the most reliable and safest swivel on the market.

All swivels are precision machined from high grade stainless steel. Clevis pins are heat treated to prevent pin damage when using steel shackles. Each swivel is manufactured with three angular contact or deep groove ball bearings, which allow the swivel to rotate beyond its rated load. Most manufacturers use only one bearing to handle the load, causing the swivels to stop rotating before it reaches the recommended workload.

Swivels are designed to pass through a sheave, but may not be pulled around a bullwheel or capstan.

Aerial Working Load [lb]:
4200

Aerial Working Load [Newton]:
18682

Diameter [in]:
1.375

Diameter [mm]:
35

Entire Slot Depth [in]:
1.31

Entire Slot Depth [mm]:
33

Height [in]:
10

Length [in]:
10

Width [in]:
10

Item #:
08080913H

Item Name:
1-3/8 7000 lb. Hex Clevis Champion Pulling Swivel

Length [in]:
5.25

Length [mm]:
133

Package Type:
Each

Pin Center [in]:
.56

Pin Center [mm]:
14

Pin Diameter [in]:
.44

Pin Diameter [mm]:
11

Shipping Method:
Parcel

Similar to:
00505-025

Slot Depth [in]:
0.530

Slot Depth [mm]:
13

Slot Width [in]:
.56

Slot Width [mm]:
14

Underground Working Load [lb]:
7000

Underground Working Load [Newton]:
31137

Units Per Package:
1

Weight [lb]:
1.380000